Batboard

ke7joi

what verison of window 7 are you using i use window 7 pro and have no problems networking with windows xp.

ke7joi

try 0.775 here in the north cascade they use an input of 165.975 and the output is 166.750 I would try - 0.775 from the output.

ke7joi

thank you that is just what I needed thank you for your help com501. Thank you for your help also Jim202.

ke7joi

ok thanks for the update sorry to here about your knee I hope it feel better soon

ke7joi

anything yet?

ke7joi

bump anyone

ke7joi

does anyone have a copy of the hln1185b service manual in electronic format I need one please?

ke7joi

sorry I forgot to add the link where I found the adapter

http://www.autotoys.com/x/product.php?productid=9002

ke7joi

is this what you are looking for

ke7joi

I just built 1 to do just that 1 25 ribbon cable and 1 db 25 male 2 db 25 female. I will upload a Picture later.

ke7joi

The manual button is used for hooking up a relay to the VIP ports on the control head and interfacing it with the "horn" on the vehicle. This produces either wail or airhorn when on manual or changes siren tones when using wail/yelp/hi lo.

Jason

Can you give me any documentation on how to do ...

ke7joi

do you have the radio program for emergency transmit if you do you have to short a jumper in the 15 pin connector or it will do that ?

ke7joi

I currently have two 10-gauge main power wires coming from the battery (fused at 60A at the battery) into the console to the main fuse panel. I would like to put both these main power wires on a 2-pole connector of some type that I can simply plug/unplug, but I am having difficulty locating any ...

ke7joi

Captain715 wrote:How did you mount your antennas on the fiberglass front quarter panels? Do you have any receive issues?

The Mountianeer is all steel except for some plastic trim panels. I need to up date the pictures as that antenna is no longer in that location.

ke7joi

Hello

The brushes are just starting to wear out the fan will still run until the brushes fail completely thats what happend to me in the winter the only reason I knew it was going to happen was the noise in my radios includeing my spectra.

ke7joi

Hello

I had the same problem in a mountaineer the brushes in the fan motor were bad all i could do was change the motor

ke7joi

have you check the antenna match and the coax

ke7joi

gentlemen

does an HCN1033D control head work with a spectra?

ke7joi

Nice install where did you get the switches on the back space on your console I like them

ke7joi

I use the det audio pin 9 to do just that in my cross band setup with a ts-32 tone decoder. works just fine.

ke7joi

Can anyone tell me what the fuse size is for the main power on an hla1185b siren module

ke7joi

hello folks

Just a quick question what cable is everyone using to program gtx hand held radios I all ready have a good rib all I need is a good programing interface cable

ke7joi

ok at long last here are the picture`s of my 2000 mecury mountaineer installation
Starting from the outside
left front cowl is a 6 meter nmo max rad
right front cowl is a modified radio shack scanner 3/8 24 mount
front of roof is a Xm satalite antenna
behind that is a larsen 2 meter 70 cm ...

ke7joi

I would start here http://www.batlabs.com/gm350.html

ke7joi

Thank you Jim202 I should read the help screens more often it`s there. Thank you for your help.

ke7joi

Yes I do I have version R06.00.05 date 03-jun-93 it is spectra lab i have rib that I have used to read the radio I just can`t find the option to delete a mode in the software.

ke7joi

How do I delete a mode from my vhf spectra I have the software

ke7joi

this radio is conventional only vhf it is used for 2 meter and monitoring.

ke7joi

Is there a way to program a standard spectra on a mode by mode for receive only so I can scan them on my spectra that has a better front end.

ke7joi

here is your anwser to where they are

CONTACT US

SINGAPORE

Postal Address :

Kenwah System - ixcessory.com

10 Anson Road

#15-14 International Plaza

Singapore 079903

Phone : (65) 9836 6827 or (852) 8120 5373
Fax : (65) 6234 0046
Email : [email protected]

ke7joi

so the next question is what unit do i need to work with a vhf analog spectra?

ke7joi

just a quick questions for you spectra gods will this unit work with a analog vhf spectra

Up for auction is a Motorola
ASTRO SPECTRA VEHICLE REPEATER SYSTEM (VRS-EP). This is a UHF 403-470 MHz 300 mW. This comes with a Motorola Spectra VRS Interface Cable. The model number is HKN6038B
http://i150 ...

ke7joi

the information you need can be found at the link below

http://docs.info.apple.com/article.html?artnum=50593

download second doc from the top

this is what I dug up with my slow connection

Power adapter
Input: AC 100-240 volts (V), 50/60 hertz (Hz)
Output: DC 24 V, 1.875 A nominally

Item Part ...

ke7joi

The A9 spectra use some power all the time you. I can this prove as I leave my radio in direct mode the radio was off. I unhooked the battery to install a new radio and when I hook the battery back up the direct lite was out this nevers happens when I just turn it off.

ke7joi

The transformers are depent on the output audio power of the radio. Most electrontic and music stores carrie them, Company that do industrial sound and intercom systems. digi-key does not carrie the that I know.

ke7joi

my join date is.

Joined: Sat May 26, 2007 3:04 pm
no problem accessing or joining did you give a valid e-mail?

ke7joi

Jongage

here is where I would start look at the table second entry from the top and start from there

http://i150.photobucket.com/albums/s112/jpmcfarlane/failcodes.jpg

as you have 2 radios with the same error code. I think the codeplug is getting damaged in transfer I would try a different rib ...

ke7joi

here is how I would do it you very the power rating of the transformers to change the 70 volt line voltage balance. If radio 1 is only 5 watt you use a 5 watt transformer. If radio 2 is 10 watt use 10 watt transformer. Any question pm me and I will try to anwser them.

http://i150.photobucket.com ...

ke7joi

I have a 4 channel CT250 uhf portable radio model aah34rdc9aa1an. Can any one tell me what software is required to program it? and if it is still avaiable to purchase? If it is nla can anyone program it for me?

ke7joi

Hey Hitower,

Where is the error registry located or what is the file name.

Thanks

Just a note of warning if you do not know what the "registry" is. Don`t mess with it you will make your computer into a brick. That being said the registry is a file used by the windows operating system to ...

ke7joi

Sorry maybe I said that wrong what is your E-mail address? He has had to block some subnets and providers due to spam. I am not sure which ones but I do know AOL is one of them that will get blocked.

ke7joi

I E-mail him all the time. What are you using for an e-mail address? He has very strong filter as he runs his own server. I can say he does very good work He recap and programed a spectra for me he does good work. I am using the spectra daily on the 2 meter ham band.

ke7joi

question anwsered

Thank you now I can get this radio programed and installed.

ke7joi

HMN1014B DTMF microphones can I change the cable on this microphones and use it on my spectra radio. As I am having a hard time finding a one for the spectra?

ke7joi

no you can`t communicate with the radio with out the siren pa attached because the radio data bus is waiting for a anwser from the siren pa. so do you know anyone with a siren deck to let you use it long enough and take it out of the setup in the rss or you could send the mlm from your radio to some ...

ke7joi

1 question has the rib and cable been tested with a known good radio and does the radio give the same fail code when the rib is and cable is not hooked up ?

ke7joi

LACityFD

does it say fail 08/10 if it does you will have to find a pa so you can delete it from the codeplug or the the radio will not allow you to communicate with it.

ke7joi

come on gentle men someone must have a manual for the gtx mobile radios

ke7joi

thank you gentle men that is just what I needed to know the only thing that is a little off. Is that a4 head has the PRI and NON PRI in the the display no red or yellow leds just the floresent desplay when you press the scan a button an arrow appears bellow the scan button the when you hold it down ...

ke7joi

Gentlemen
I have An A4 VHF spectra I know how to program items into the scan list but I don`t know how to delete channels from the scan list help

Search found 82 matches