Batboard

radios4bill

Hi, Thanks for responding. The CPS is 12.1 (Build645) the Model is H55QDH9JA1AN and the TANAPA is PMUE2356AA and the Firmware now is R01.00.01

radios4bill

Hi Group, I don't know if this not allowed? So delete away if not. I picked up a XPR 6500 and if has such old firmware R1.00.01 and it don't give the Color Code option that I need for Amateur DMR. I know when "M" discontinues a radio the Firmware was posted but I cant find them and "M...

radios4bill

I guess no one but us are going!

radios4bill

How many do you need? I have several used cut offs you can reuse? Bill

radios4bill

HI Group; I purchased a Astro Spectra Plus and the radio would only power up when both power and ignition sense were powered and the ON/OFF switch would not work. I found some docs on jumpers it the head so I found my jumpers were JU2 was in and JU1 was in, I switchd them and the ON/OFF started to w...

radios4bill

Hi Group; I have a XTL5000 with a dim display and I purchased a replacement. I don't know what version firmware is in the replacement head. So here is my question, how to I do this with out bricking the radio? If no one can tell me how to do the head programming or flashing can I just replace the fr...

radios4bill

Hi Group; I have version R06.10.04 and am having problems finding the address to edit. I have done this with older versions but this one is giving me problems. Can anyone help? Thanks, Bill

radios4bill

Hi Group; I purchased several new XTL5000 High Power units in the 03 head configuration and I would like to know what cable and or what port on the radio to use? I have searched and can't get a correct answer. Thanks, Bill

radios4bill

Hi: can someone tell me if a Flashcode of 0010080020006 is a 512 Vselp? Thanks Bill

radios4bill

I am in! Anyone have frequencies that will be in use this year? Bill

radios4bill

Thanks for the help that was the problem the time was at 0 and it would not show the ID's!

radios4bill

Hi Group: I am having trouble getting my APX7000 to decode MDC? I have it encoding with no problem. I can't find it anywhere in the CPS? Can someone assist please? Thanks Bill

radios4bill

I have a XTL5000 R1 UHF 05 Dashmount and when I add "PROG" in menu it does not show in display. I want to add / delete scan channels on the go. What am I doing wrong? Thanks, Bill

radios4bill

Hi Group; I have a Minitor III pager and the model # is A04YMS7238AC and would like to know the frequency range and any other info.
Thanks, Bill

radios4bill

So what does that mean? Is there or will there will there be a problem with this radio? Do i need to get this removed? Thanks, Bill

radios4bill

Sorry it is 58D288-441EE0-7 the feilds are D6 B3, D5 B3, D2 B2 Thanks, Bill

radios4bill

Hi group: I need some info, using the Akardam decoder on a flashcode from my XTL5000 I am getting "No valid options for this bit on selected platforms" coming up on 3 lines.
What does this mean? Does it have a bad flash? I have never seen this before. Thanks, Bill

radios4bill

Hi Group: I have a question about Minitor III pagers. I recently picked one up and purchased all required hardware to program it. I am using a windows 98 machine running the program under true DOS. I am recieving (model number error) It shows the correct model number and serial number is showing a q...

radios4bill

HI GROUP: DOES ANYONE KNOW HOW TO OPEN THE NEWER BLACK EXTERNAL SPEAKER MODEL HSN 4030 A THANKS, BILL

radios4bill

Hi Group; I am looking for some help. I am wanting to replace my factory XTS5000 volume know with the FDNY replacement knob. Is it easy to replace? and do I just need the knob? Thanks, Bill

radios4bill

I did look at every doc on this site and tried everything. After 2 day of palying I figured it out. I hope to post a doc on what needs to be done and in what order it needs to be done. Thanks, Bill

radios4bill

Hi Group; I hope someone can help me with my issue. I have read all the docs. on the board and have followed all of the steps and have saved the files to the CPS Voice file and to my docs. and when I try to add the files they are not listed in both folder. Does anyone have additional info on this? T...

radios4bill

Hi Group; Can someone tell me if the 6550 Inpress battery will charge in a XTS Impress Charger? Thanks, Bill

radios4bill

I will be there on VHF P25. Looking forward to the weekend. Bill

radios4bill

Thanks for the reply! I tried that and because I have 3 systems in the radio it don't work. All I get is "OUT OF RANGE" any other thing I can try? And why is it only 10 talkgroups on a 2500, I have 16 on a 5000?

radios4bill

Hi Group; Well I have a problem that I have not been able to figure out I have a XTS2500 (8 MEG) and I can't get it to scan talkgroups in differant zones only within same zone? And I can only get 10 talkgroups to scan with a zone? Can anyone HELP? Thanks, Bill

radios4bill

Hi Group: I have several XTS2500's and are getting tired of the weight, the radio alone is ok. I have NTN9858C Nickel Metal on them and was wondering is anyone knows if the Lithium Ion batteries are lighter and slimer? Thanks, Bill

radios4bill

Hi Group; I purchased a VHF MTS2000 today and when I read the radio with CPS R02.02.00 it reads fine, but after I make changes and sent it to the radio it looks like the radio has been programmed but no changes. The radio has no trucking from what I can see. I did notice that when the radio complete...

radios4bill

Hi Group; I picked up a MCS2000 UHF Model III 100 Watt radio and I am having trouble with PL. I can't figure out how to program the PL? When I ground the microphone on the clip it is still receiving other PL's It has a 2 prong molex on the control cable, is that for a "old school" type han...

radios4bill

Hi Group; I purchased a Motorola Astro Saber AVA Model # NTN7227B and I am in need of a power cord, plug or diagram on the wiring. Can someone help? Thanks, Bill

radios4bill

Hi Group; I recently purchased a AS II that looks like it was in a war! Anyone have a "New" or "Gently Used" Astro Saber case for sale! Thanks, Bill

radios4bill

Hi Group; I have a question? I purchased a H37Smartnet ASII will it work on a H38 Smartzone System? Thanks!

radios4bill

Hi Group; I have a question! I purchased some 512k Boards from one of the members and when I put them in a radio (800MHz) I get "Fail001 I am guessing that it is because they are for another band? So If I was to get a S-Record for a 800 MHz AS III 512k is that all I would need? If I have a work...

radios4bill

Hi Group; I have a question! I purchased some 512k Boards from one of the members and when I put them in a radio (800MHz) I get "Fail001 I am guessing that it is because they are for another band? So If I was to get a S-Record for a 800 MHz AS III 512k is that all I would need? If I have a work...

radios4bill

Hi Group; I am looking for the person that was selling Vselp Vocoders at Dayton this year. I am in need of another! Thanks, Bill

radios4bill

Hi Group; I am new to the XTS Series radios and just purchased a 5K and a goverment surplus 3K. I have been having several issues with the 3000. #1 I purchased a III so I could use the keypad to remotely program my repeater controllers and can get this to work. #2 When I turn one the radio and trans...

radios4bill

Thanks Group! That was the problem! I removed the secure and talkgroups in CPS and no more failures or beeps. Thanks, Bill

radios4bill

Hi Group; I am in need of some help! I purchased a UHF XTS3000 and I am having some issues. I read the radio and saved the origional CP and then proceeded to program 1 zone with all conventional channels, and then the problems started! When programming was complete the radio reset and then beeped 5 ...

radios4bill

Hi Group; Can someone post a model chart for XTS series radios? The list on Batlab's is a little outdated. Thanks, Bill

radios4bill

Hi Group; I am having a problem with my HT1250's When I purchased them they had a battery indicator on the screen, and now they don't? I checked everywhere in the CPS and the only thing is in button config. and that don't change anything? Anyone know the secret! Thanks, Bill

radios4bill

In the center of the PA there is a tiny BLUE pot! That is your output adjustment!

radios4bill

Hi Group; I am in need of a Codeplug for a UHF Spectra D44KXA7JA5BK Thanks, Bill

radios4bill

Thanks Group; I have the info on changing the reg. but don't know where / how to do this? I am in cleveland , ohio. Thanks, Bill

radios4bill

Hi Group; I have a question! I have a HT750 that a friend needs programmed. When I read the radio it shows "ERROR 4-1379" Does anyone know what this is? When I looked closer at the radio it shows HT5150 on the ID tag, so I tries the other SW and it won't read? Thanks, Bill

radios4bill

Hello Group; I need help with programming on a Motorola CDM 1250. In the menu it shows "SCAN ALL GROUPS" but it is shaded out? I need differant channels in each group to scan. It will only scan channels in group (1) one no matter what group I am in? Can enyone help? Thanks, Bill

radios4bill

I hope someone can help! I have used TK in the past but have forgot how to get it to work on Com1? It wants to use LPT1. Thanks, Bill

radios4bill

Thank you but i have a CP for a II but the reason for doing this was to get the origional S/N back in the radio. You have sent me info in the past in how to restore S/N but in did not work.

radios4bill

I KNOW! It was not Lab that i was using. It was 9.5 The radio is a AS II Ruggedized 800MHz. I hope someone can help! Thanks!

radios4bill

I have a Astro Saber that was received with a APCO 25 and i attempted to put a VSELP codeplug into it, and it did not work! Now i have a problem! I did not read the radio and save it. But the person i received it from had the CP saved and he sent it to me. Here is the question! the CP is CPS and all...

radios4bill

Hi to ALL! I have a CDM115LS that i am attempting to get more than 16 Con. channels. Checking out the model number it shows 128 channels? Can anyone HELP! Thank You, Bill

Search found 57 matches