Batboard

radioEd

that was posted by jim2121 above

A search from 2006 brought up this thread:http://batboard.batlabs.com/viewtopic.php?t=53257&highlight=dayton+dinner
theres 3 pages.... I already shot some PM's & an email off to those posting frequencies from last year...so until you see a follow-up you can use ...

radioEd

http://www.repeater-builder.com/motorol ... -info.html

radioEd

On 2002-02-03 16:36, Smurf wrote:
Hi Everyone, I was wondering if anyone could help. I have a department issue MTS 2000, and just purchased a used MT-2000 both in the UHF Band. On the MTS-2000, almost a year old now, when transmiting it sounds like a gust of wind is going by the mic...when there ...

radioEd

On 2002-02-03 04:18, DEK wrote:
Getting a fail code 01/90 - cant get radio to shut off or reset
Any Ideas ?

I believe thats a FATAL, hardware failure, Possible Source, Defective IC..did you check out the batlabs page. try this link:
http://www.batlabs.com/gm900.html
Since its 3:30am my time..I ...

radioEd

On 2002-02-03 02:14, [email protected] wrote:
Hi:
For those who need it, and so long
as its " Active " Hold down the Control
Key, and find " Print Screen" on your Keyboard....
Thank you for considering MTS for your
maintance.
MS

I just tried that. A key I always forget. "Print Screen"! Mine ...

radioEd

I would send it to Monty, [email protected] for good work! at fair prices! Next time someone goes in the service area. Print out or write down EVERYTHING! (I don't think there is a f5 Print key for JT'/Ht's) But there is for most Sabers. Ed

radioEd

On 2002-02-02 20:17, vcaruso wrote:
Hey Ed,
Nice spread but...
Where is the espresso machine & the fridge

I knew something was missing! Nice pick-up Vince! Mom-ma-mea!

radioEd

Sent you a email Tony! .....Ed

radioEd

On 2002-02-02 10:29, bart215 wrote:
I have a motorola gtx mobile smartnet model and I am having a programming problem with it. I am not sure I have the right r.s.s. When I try to program the radio the r.s.s. tells me that the radio is not supported by the r.s.s. Is there a difference between the r ...

radioEd

Insurance premium would be hell to pay.

radioEd

Problem turned out to be a bad SB-3 button! I reversed the squelch to SB-2; now it works fine! left SB-3 "unprogrammed" & the bule button on top is for the light! thanks for all those who helped me out! Ed

radioEd

On 2002-02-01 20:12, 10-95 wrote:
I would go with A, but I don't like that one , looks like it would be too easy for my radio to fall off if I were scuffling with someone.Ge and Motorola both make one like the A that is a lot better!
10-95
[ This Message was edited by: 10-95 on 2002 ...

radioEd

On 2002-02-01 20:28, Will wrote:
Ed, I do not have the RSS for that paticular radio so I do not know if it is simmular to the HT1000 RSS.

I have it Will Thanks! R06.05.00 It all says squelch enabled? but it does not work? I have to go to work at Midnite, I'll switch radios & write to another MT ...

radioEd

On 2002-02-01 19:28, Will wrote:
Isent the settings for the three side buttons simmular to the HT1000 radios. It is in the Side Button Configuration screen (HT1000RSS).
Under the Radio Configuration menu.

Thanks for the replys! Ed

radioEd

[quote]
On 2002-02-01 09:13, Keygun wrote:
Check the settings for the user selectable unsquelch modes.
Keygun
[quote]
I'm still stumped! I dropped you an email! thanks for the reply! Ed

radioEd

When I got this radio, it had 24 Phoenix, PD freqs. programmed in it. After putting 2-meter freqs in. The SB3 side button does not open the squelch? (after the 5 second beep it would remain open) Now after deleting the PD freqs, & putting in 48 ham freqs. The SB3 side button does not open the ...

radioEd

On 2002-01-31 17:16, Astro_Saber wrote:
forgot to post it in the fs forum

Better start making your Feburay List!

radioEd

Good point! but when the PM say's, I typed in the wrong password! Use back button, over & over! (and its only 4 letters) Hum! must be a server thing! Ed

radioEd

For a second I thought I was in the wanted/for-sale forum.....hum

radioEd

On 2002-01-30 09:47, Tom in D.C. wrote:
The new topic column format (narrow) is very difficult to read. Hope it's just a temporary thing...
Tom, W2NJS

Exactly what I was thinking Tom! least he could do is make it: CORNERSTONE COMMUNICATIONS INCORPORATED!!!!!!!!!!

radioEd

On 2002-01-29 04:14, N4UMJ wrote:
All right on the MT2000 there ED. I saw one of these at a Hamfest this past summer and really did like the looks of it.
Alphanumeric Labeling and the LCD display looked good and DTMF keypad too. I recall there are some MT2000 versions that have the LCD viewable ...

radioEd

On 2002-01-29 02:18, N4UMJ wrote:
Hey Ed,
Food for thought.....What if you programmed yours as a Secure Capable "QXK" Saber. The H432 option might appear then. Not too sure about that though........I try to stay away from any of the encryption options since I don't really have a need for them.
I ...

radioEd

On 2002-01-28 19:23, 10-95 wrote:
Thanks Eddie, I have played with Sabers for about 15 years now and never knew that!!
Frank
10-95

Me Too! All these years I too never knew that! I have a saber II H44SAJ7139CN 120ch. 440-470bandsplit and in the F4 options, I have no 432, matter of fact nothing in ...

radioEd

http://www.batlabs.com/sp50.html

http://www.batlabs.com/sp50c.html

[ This Message was edited by: radioEd on 2002-01-28 01:19 ]

radioEd

Never heard a Saber II beep, on power up! (or turning it on) The Jedi series does! (and that can be enabled/disabled) Ed

radioEd

On 2002-01-27 20:33, xmo wrote:
ECONOMIC BAROMETER

I've been taking various of these trade type tecnical publications for more than 25 years and the thickness of the issues tracks how well business is doing!

That sounds about right! I subscribe to MRT for 13 years now!, last two copies were ...

radioEd

Hi! You can compare the two units from the .pdf files at the bottom! should answer alot of questions. cya later Ed
http://www.motorola.com/cgiss/portables/ht1250.shtml

http://www.motorola.com/cgiss/portables/ht1550.shtml
The 1550 had a release date of 2/00...

[ This Message was ...

radioEd

pvt. messages

radioEd

On 2002-01-27 08:52, Batman wrote:
Here is the oliver welp homepage.

He has software that works thru your soundblaster card. PL / DTMF tone decoders, scopes, packet, MCW, etc.

http://www.muenster.de/~welp/sb.htm

Robert P. Chrysafis (batman) (kc8gpd)

Thats the website I was looking for the ...

radioEd

On 2002-01-27 10:18, RadioSouth wrote:
As mentioned you need to have the radio read
to find out for sure. If you're pressing a side button and getting a 'chirp' it's probably the 5 sec.(default setting) telling you the radio's in the permanent monitor mode. If you're pressing other buttons and ...

radioEd

I have an x9000 100w. On a Daiwa RS-300 (30 amp from Tucker Electronics) It draws 18 amps on the meter. 17.5amps on an Astron. If that helps...plus it draws 18 amps on a Kenwood 430 (100watt) HF rig.

[ This Message was edited by: radioEd on 2002-01-27 12:28 ]

<font size=-1 ...

radioEd

On 2002-01-27 03:19, KG6EAQ wrote:
I read that it will go about +/-5mhz out of band. How does it act in those 5mhz? Does it do ok, or does it drop off? I run across the 148-174 Sabers all the time, and want to program 2m ham freq's into it.

Thanks
-Robert F.

Most in general will go 1Mhz. appx.

radioEd

Last I downloaded & played with was "WinPSK"
http://www.qsl.net/ae4jy/winpsk.htm
worked about 17 countries, some islands, & 41 states..lots of adventure on 20 meters. Ed

radioEd

[quote

My post says I will NOT be using a Pentium 1ghz for programming, only to write the codeplug and save time. I will then put the codeplug on a floppy, and dump the codeplug to the saber on my 386 programming laptop. Calm down and read it again before jumping to conclusions.

[/quote]
I am ...

radioEd

Hi Matt! How many post have we seen by Monty & Elroy on programming the Saber? (over 50)? you know you need true DOS, on a 386/486 x 33 computer. A good RIB & cables! We plug our pc's into "APC-UPS" power back-up systems, cause we get unpredictable blackouts/brownouts here in AZ. The few times I ...

radioEd

I've been using this http://www.qsl.net/ae4jy/winpsk.htm
But this "iLink" looks like some real fun! Gonna have to give it a try! Ed

[ This Message was edited by: radioEd on 2002-01-26 20:54 ]

radioEd

There's a feedback form (click on that) then fill in 20 questions (plus!)

radioEd

On 2002-01-26 11:36, Tony Soprano wrote:
Ed, do you have Motorola Online access
yet? They have a Manuals section too,
but right now they only have Astro stuff.
Hopefully they add the rest soon.
Tony

Hi Tony! I've had close to 50 emails & Pvt. messages on where the link above was. Found it on ...

radioEd

http://accesssecure.mot.com/Accesspoint ... t+vedl4388

And a thank-you to Batlabs, who has this link on the homepage! 5 days to say byby to Acesspoint...

radioEd

On 2002-01-26 03:07, EC-7 wrote:
I think that the UNTENNA is UGLY!

I don't care what it looks like! I'm only interested in results/performance. That's what counts when you rx/tx on the radio.

radioEd

On 2002-01-26 00:58, Flametamer wrote:
This is not directly related to this post but, has anyone ever heard of or tried the Untenna? http://www.untenna.com
Just curious
Darrin

You'll find them in the ARRL books, some articles (for me) as far back as the 1970's ..been around awhile.[nope never ...

radioEd

Go to the Google search engine & type in: XTS3000R...They claim the same test was done!
have fun on your trampoline..

radioEd

I'm on 800Mhz. type II, Still bad batteries! but since I work for the county. (radio-repair). I'll let them battle it out for the NickleMHyD's...Corrections switched to Kenwood radios...your right "moto" don't care! Ed

radioEd

email

radioEd

Motorola says: there Marine radios are tested for Five min. at a depth of 1 meter. LOL

radioEd

If you think about it..RF will find ya all the time. from a TV set, cell phone, (how would you like to sit and work a radar gun)? I don't think you can hide from it anymore. Just try to keep it at a minimun

radioEd

On 2002-01-25 22:18, April wrote:
Radio Ed, !!!!! a later version than 1.9 Feb 1988???? I also have a Ham radio version that is 430 to 449.975, with a 2-88 date.
April

Well I went buy Motorola AccessPoint homepage. for latest software, it lists 9/22/94..I don't think I said 1988?

radioEd

On 2002-01-25 18:14, 10-95 wrote:
The FCC is not likely to bother with them unless someone else trys to get the frequency, but since it is in the law enforcement pool, it's not likely that another agency would try to take a frequency currently in use by a public saftey agency. Law enforcement and ...

radioEd

You might save some money on the batteries? check out:
http://www.batterycountry.com/ShopSite/ ... torola.htm Ed

radioEd

Don't keep the theory to yourself. Thats why were here....let me know to! E=Mc2 TIA Ed

Search found 373 matches