Batboard

EKLB

Anybody have or know how i can corect the following problem i have. I can send and recieve emails fine but cant send emails with an attachment. Windows 2000 with outlook express 6 . I thought it might have been my Mcafee version 9.0 but i uninstalled it and still cant email an attachment back to me ...

EKLB

EKLB

EKLB

Or better yet ask for help here on the bd.

Several here are up to the task with experience to boot.

Thats assuming your willing to pay shipping ect .

EKLB

EKLB

EKLB

Wow i must have been stupid thinking above on my posting of the 5172 being a masked bd. I was so sure that i just popped the cover off a 5172 bd and yes KB0nly is corect = it does have the removable prom. My bad and i stand corected. I cant say ive tried converting one of these to 16ch or more but i...

EKLB

EKLB

EKLB

EKLB

Not enough information given by you to help out. The GP300 you describe must not be the USA version but the European Select V model since you mention the display. What is the model number of the radio your needing help with ? Is it UHF or VHF ? If the radio in qestion is also the radio pictured unde...

EKLB

I normaly wouldnt have done much with it but its new in the box. (Box still intact and stapled shut on each end with metal caps in place ) Box tube pretty worn and tattered but the antenae itself with a wet rag run over it appears new. ( Pretty thing)( Too bad it was a CB base antenae) Box Tube look...

EKLB

Think my spelling on shakespeers wrong but anyway. I have a Shakespeer BIG STICK base station antenae. Cant say for sure the model number but its intended for CB use originaly in th 27 mhz band. Anyone know what its actual operating specs are as to possible use in the 10 or 12 meter HAM band ? Any o...

EKLB

EKLB

I have PR3000 UHF pagers ( Not the VHF ) in service yet today with a few customers and they seem to be happy with them . I cant say ive had serious troubles with them but the battery door seems to get replaced a bit more than i had expected. Otherwise they pretty much did the job without too many pr...

EKLB

EKLB

EKLB

EKLB

EKLB

EKLB

EKLB

EKLB

EKLB

EKLB

EKLB

EKLB

EKLB

EKLB

EKLB

EKLB

If youd prefer it done by another individual due to not being so sure of your abilities = Read on. Ill convert your posted mobile above to the full capabilities of a 32 ch mobile with scan / Two tone =encode and decode(QCII) Will supply the HLN5569 eprom needed to allow the 32ch upgrade along with t...

EKLB

EKLB

To clarify Max-tracs CORRECT statement. The 5 pin logic bd will behave the way you described if it has the masked prom on it. It can scan as you would like it = If the 5 pin bd you have has a removable eprom on it. The 5 pin logic bd that ive run across that does have the removable eprom is a HLN517...

EKLB

Dont recall exactly where i saw it but there is a wire around the timer in the radio that you put a potentiometer in place and then set it for the drive to the pa for the wattage output you wanted. Obviously you unwired the other driver circuit and put in the potentiometer from another part of the c...

EKLB

Hello Scruff From the model number you posted ( P94YPC00C2 ) you have a 12.5 narrow band at 16ch capability. The model number ( P94YPC20D2 ) Is a 25 khz wide band at 8ch capability. DO NOT ATTEMPT TO CLONE THE WIDE BAND READING INTO THE NARROW BAND ! Program should show a error indicating model mism...

EKLB

I looked at a programming booklet for the Maxtrac Trunking mobile in hopes it just might be the same error code for explanation. Im thinking your refering to a conventional mobile or at least thats my thought. I did not find error code 54 as a code in the trunking book but did see a error code 53. E...

EKLB

Like i said before = It was a freindly mention and i stated so in the posting. Even if he has a legal copy of the rss ( And i give him the benefit of any doubt till proven otherwise and then i still really dont care as its not my situation) You still cant ask for the program from other sources other...

EKLB

Fresh member with only two posts and an attitude = Wow Shoot i didnt assume you pirated any rss = could care less. I was only attemptimg to help with info. And as i said a friendly mention so you wouldnt have gotten in trouble with the mods. This is a classic example of why i just dont bother to pos...

EKLB

Just to add clarification. The model definiton file your refering to is also called the MDF . The MDF tells the program what model number your radio is so that it knows what to read and what to display as results ect. In other words if the radio is a VHF P93 model it uses that part of the program ec...

EKLB

Does anyone know whether or not the GP300 can have a inversion scrambler installed in a GP300 with DTMF ? If im corect my last conclusion ( A few years back anyway) was that MxComm inversion scramblers were installed where the DTMF normaly was so you couldnt put in a scrambler unless the DTMF was re...

EKLB

Yes you can clone the reading of another GP300 that has DTMF as long as its the same model number. If the 16ch radio you have did not have the DTMF option from the factory then it does need the added programing to the code plug to do DTMF but as you read above a reading from one with DTMF cloned bac...

EKLB

Was wondering if anyone had any contact info on the Dallas co now part of Maxim Semiconductor. I did order a chip from Digikey but they say its similiar to the Dallas 1287 chip and i was thinking id like to order a known working eqivelent of the Dallas DS1287 chip as a replacement. DigiKey sugested ...

EKLB

Yes the 93 in the model number you provided makes it the VHF band and the C2 tells us its a 16ch in the VHF high band split rather thanc the VHF low band split.

VHF hi = 146 to 174 mhz i believe is corect.

VHF lo = 136 to 162 mhz i believe is corect.

EKLB

EKLB

Outstanding !!!

Thanx to everyone that answered= Sure cleared things up for me.

EKLB

EKLB

Hello WILL:

Thanx for the reply.

Qeustion = Was i corect in assuming the battery is in this chip ?

Thanx EKLB

EKLB

Hello Batlab Members: Got a BSR computer than finaly powered up with a CMOS RAM ERROR = CHECK BATTERY / RUN SETUP that the screen displays upon power up. Well it appears the computer does not use a button battery or a prewired battery of any type that i can find on the main bd. But it does apear to ...

EKLB

Well for the most part id have to believe youd be best off by getting a tee adaptor for your AM/FM music radio and simply plug into it and use the vehicles factory antenae for rx on both the Music radio and scanner combined. Although it may not be a perfect match for a freq your scanning it would rx...

EKLB

Might seem too simple = but did you remove the plastic ptoective cover from the back of the P100 radio so that the two program contacts would make contact ?

EKLB

EKLB

If a MTX800 model number H25JGB5170DN is what your in need of = PM me with your email address.

This is a single ch portable only = not a multi ch if that helps you in IDing it.

FCC ID number = AZ489FT5667

EKLB

EKLB

Im not 100 percent sure on this but i believe that a Kenwood is programmed directly off the computer through a Kenwood program cable designed for the Kenwood model you want to program and does not require a RIB.

But please do check the accuracy of my statement for your radios in qeustion .

EKLB

EKLB

Yes the Maxtrac 99ch mobile that i have IS one of the canadian ontario radios.

It was converted by Nand and a great job of it at that.

It can easily be converted back to the 42 to 50 mhz band it was originaly in as factory before the conversion to 50 to 54 mhz.

EKLB

Search found 659 matches

Email Attachments On OutLook Express 6 ????

Shakespeers BIG STICK Antenae ?

GP300 with DTMF and Scrambler ???

DOS computer = CMOS RAM ERROR ???