Does it matter what comes after the AT28C64? When I search in e-bay there are quite a few options?

I appreciate all the help.

Thanks again....

Where do I find the Atmel chip and what is the procedure for changing it?

Thanks...

Ok. I finally made it to the site and pulled the card. The PLCC (directly behind the volume up button) is an Xicor. Where do I find the Atmel chip and what is the procedure for changing it?

Ok... I checked the firmware and I have the latest and greatest. The error log shows the following:

SC Root 655

What does that mean?

Hello Everyone.... I am stumped on this one and don't know where to start. Here is the problem: I have a high power VHF Quantar that is running in mixed P25/Analogue mode. The repeater has a wire line card installed that is not being used so the station will occasionally show a WL Fail light on the ...

What exactly is a TIB & Foil and why can't I use the one that I have? Do you have the part numbers for the one that I need? Thanks again for all of the help and information.

First of all I have searched and can not find the answer to this question so please forgive me if it has already been asked.... I have a remote mount XTL5000 with a w7 control head. Can I remove the w7 head and plug in an o3 head and it work properly? Will the radio need to be re-programed and / or ...

OOPS... I think that the head is an o5 not m5. Sorry

Hello everyone... I have tried to search the site to make sure that I am not duplicating a topic and can not find this information anywhere.... so here goes... I have a one piece XTL2500 that has an M5 (I guess the standard head) head that I would like to convert to a remote mount. Does anyone know ...

Ok everyone... I am new to motorola encryption and just pruchased a XTS5000 with Secure VAR and Secure ADP. The radio is 700/800Mhz and is being used on a type ii system. My questions sounds simple but I know that it can be complicated... What can I do with the types of encryption in this radio? Can...

Thats a great help but what do they all do? Has anyone listed a detailed description of each one?

Hello everyone.... First of all. Does anyone know of a site that accurately lists all of the "flash" options for the xts2500 / 5000 series of radios and what they do? I see listings on ebay describing radios with varioud options and some of them seem obvious as to what they do but what abo...

Ben,
Thanks alot... I was begining to wonder if I was totaly motorola dumb...

- Jason

Hello Everyone... I am attempting to program two HT-750 radios for a friend. They are 4 channel vhf radios and the model number is AAH25KDC9AA2AN. The problem that I am having is that the only type of signaling I see in the software is MDC. I am using CPS v6.04. I do not normally program VHF radios ...

immelmen28... Thank you for reply. I think that you might be on to something. Yes the system is a trunking system that is hybrid digital and analogue. On the digital talk groups I see the ID but on the analogue ones I do not. The radio shows the following : R07.08.00 & DSPN08.08.02 Is this too o...

Hello Everyone, I am not so sure that I have a problem... I am probably not doing something correctly. My XTS3000 will not show the ID of the station that is transmitting... According to the flash code "500004-000000-5" it has the "H14/G114 Digital ID Display" option installed an...

What do you mean by "firmware bump"? Did you send it to the depot to have this done and if so how much did it cost?

- Jason

Hello everyone!!! My XTS3000 has firmware version R07.08.00 and DSPN 08.02.02. My question is this... Is there a good place to find out what the current version of this information is, and what the version that I have does? I have seen several topics here that talk about what firmware version will s...