wb4bli,

The L1548A requires an extra 4 wire add-on board to work the way you want it to. You may be able to obtain one from GAI-Tronics @ 800-492-1212.

wrowzee,

Not sure if you got an answer for this yet or not, but you will need the RSS to change the alert tone back to "warble" or "two-tone". It sounds like the unit reset to default parameters which sets the alert to "continous". You can get a newer, win-based programming software (CARD Suite ...

GAI-Tronics has one of two Console Dispatch solutions that may suit your needs. Depending on what you are looking for, they have a standard Button and Led Desktop version and a GUI Computer Touch-Screen version. Both units are capable of 4, 8, or 12 channels. The 4 and 8 channel models are ...

Does anyone know who manufactures the HMN3000B Deskmic for Motorola?

mokena208,

Sorry, I was out for a few days and didn't get a chance to reply. The same cable that would use for a GM300, you would also use for a CDM Seriers radio. Of course the plug goes directly in the center of the connector with 2 pins leftover on each side. The only thing you may have to ...

Tom,

You are correct in the pieces that you would need. The tone adapter would have to use binary addressing in order to steer channels on the GM300 and CMD Series radios. There is no special adapter needed, just the proper pinout on the connecting cable.

sheriffjimmylee,

GAI-Tronics makes a 12 Channel Dispatch Console which will fit all of the requirements that you are requesting. You can view specifications of this Console at http://www.gai-tronics.com. Scroll down the page and click on the link "ICP9000." This unit can be purchased with options ...

The Comtegra unit was availabe and STILL IS in either Tone or DC Control. In both applications, you would need an adapter to interface to the radio that you are using. For more information on these adapters or the Comtegra, please contact GAI-Tronics @800-492-1212.

Brian

You just need to match the terminals up with the corresponding pins on the back of the GM300:

Mic Hi --> pin 2 on Radio
Mic Lo --> pin 7 on Radio
Rx Hi --> pin 11 on Radio
Rx Lo --> pin 7 on Radio
PTT --> pin 3 on Radio
MON --> pin 14 on Radio

If you have the wall transformer for it, you connect ...

The DGT9000 can be set up with the Desktrac. Below I will list the steps to do so:

1. From idle state, not connected to the Radio, press "Local" and then "1,4,9,0"
2. Power down the unit.
3. Press and hold "Home" while powering up the unit.
4. Press "Mode ^" until you see "Spectra"
5. Press "*" to ...

Just wanted to make you aware of GAI-Tronics Radio Dispatch Product line. We make a full line of Tone and DC Desksets and Consoles. We previously made the Command PLUS Console for Motorola. Currently we have a 4, 8, or 12 channel unit which took the place of the Command PLUS. You can view the specs ...