Batboard

sheldon

Any progress on this as yet?

sheldon

Same problem here in Oz. Has to use Google Chrome get around it.

sheldon

/\/\otorola manuals = Jiberish

sheldon

To elaborate further for you Russell, I tried using a virtual PC with XP and also a dual boot machine with windows 7 and XP and it still did not work. Even when trying to run it in compatibility mode. As stated above, until it was installed on an XP dedicated machine, it would not work. Strange caus...

sheldon

I had the same problem with a customers netbook on Friday in Canberra. Problem was it would not under any circumstances work on anything unless it had XP or older. Windows Vista and Windows 7 gave me this exact error each time. Soon as it was installed on a dedicated xp netbook, eureka, works like a...

sheldon

Well done! Very nice and clean install

sheldon

I have an XTL5000 W3 UHF 380-470MHz unit that randomly gives me "Fail 001" when trying to TX on OOB (+7MHz) channels. Whats really weird though is after the radio has been on for atleast 15-20 mins, the radio in question TXs with no issues and puts out a strong signal (confirmed with servi...

sheldon

Hi guys,

I have a Panasonic Toughbook CF-29 (CF-29LW1AXS).

In the bios, Touchscreen is enabled. I have Windows XP Pro SP3. Device Manager shows Touchpad/Touchscreen under Mice and Pointer Options.

Any help would be greatly appreciated as I cannot get it working.

Thanks

sheldon

http://www.ebay.com.au/itm/Motorola-XTS3000-ASTRO-Digital-P25-Aussie-UHF-CB-/320805143821?pt=AU_Electronics_Radio_Equipment&hash=item4ab17a050d http://www.ebay.com.au/itm/Motorola-XTS3000-ASTRO-Digital-P25-Aussie-UHF-CB-/320805155583?pt=AU_Electronics_Radio_Equipment&hash=item4ab17a32ff http...

sheldon

The method described by Mike M on the first page.

sheldon

I have properly programmed a local P25 Trunking System into an XTS5000 and I am trying the Talkgroup Scanning method as described in this thread but none of the TGs will un-mute. I also have another zone programmed to monitor TGs in conventional and it works perfectly however when I switch between T...

sheldon

I am trying to add TGs into the Trunking Personality / Talkgroup tab in CPS 16.00.00 and regardless of what TG I enter e.g. 40426, the CPS comes up with an invalid field error! Any ideas what may be the cause? Do the TGS have to be in HEX format?

sheldon

Sure you really want to program your radio onto the GRN? It's a 9600 system, and it will affiliate, and I'm told the current system manager is quite conscientious about hitting the inhibit button on unauthorised radios. I'm not programming any radio on the GRN, was curious why on RR database the sy...

sheldon

Thanks

sheldon

Please PM me the vw and yz values.

sheldon

I just tried to decode a 3 digit system ID off the batlabs page on creating a system key but cannot work it out correctly. Anyone know what the last 3 bits of the data string are for a system ID of 2D1.

2C B5 32 B3 88 0D 6A DF 4B B4 E9 95 2C 6D 1C 03 37 24 1F 5B 93 BF 24 1A vw FF yz

sheldon

Lol, near the ponds!

sheldon

Hi guys! I thought I would put this one out to the experts and see what comes back. I have the following equipment I need to install into my car: W3 XTL5000 Mid Power UHF 380-470MHz W3 Astro Spectra High Power Dash Unit UHF 403-433MHz W3 Astro Spectra High Power Dash Unit VHF 146-174MHz These radios...

sheldon

I do have images of the majority of the cockpit - althought its taken through the cabins glass windows creating reflections. If you would like them, PM me and Ill put them up when I get the chance! FYI - The pilot would not allow me to take pictures from inside the cockpit, he claimed it was a secur...

sheldon

Interesting read here describing what the twin antennas are:

http://trollsystems.com/products_skylinkhd.htm

sheldon

Took these pictures today of POLAIR 1 at Batemans Bay NSW taking part in a S & R operation. Look closely at the twin beams located underneath the fuselage. Enjoy! http://img809.imageshack.us/img809/9308/img0010zom.jpg http://img38.imageshack.us/img38/8140/img0012uy.jpg http://img11.imageshack.us...

sheldon

Can you buy an apx7000 that covers both 380-470 and 450-527 MHz bands? My local dealer doesn't seem to know if it's possible.

Regards,

sheldon

Anyone else able to confirm or deny this?

sheldon

Didn't know where else to put this one but here goes. . .

To all those who perished may you RIP. All the families trying to rebuild their lives, may god be with you all on this very sad anniversary.

sheldon

I saw a senior Australian Federal Police (AFP) officer in Canberra the other day carrying an APX7000 portable radio. I asked him why he had it and he said that only a couple senior officers had them so they could liase with other agencies comms centers. The AFP not that many years ago rolled out Aus...

sheldon

As the topic says, I want to upgrade my XTS5000 H18QDH9PW7AN radio to be a Ruggedised portable.

How is this done and how much money does it cost? Also, if you can do it, please PM me pricing.

Thanks in advance!

sheldon

Problem sorted. Had to uninstall and reinstall the software and it seemed to fix the problem.

sheldon

location is kinda already done if you finish filling it out in your account True, but filling in your account details more doesn't give members a place to discuss systems and equipment specific to their location. Would be a great way to get members who live near each other interacting more and meet...

sheldon

I would like to see subforums based on members locations such as US, Canada and Australia created so members can locate each other better and discuss more relevant information regarding systems and equipment available in their countries. Anyone else support this idea?

+ 1 for an Australian subforum.

sheldon

I have an XTS5000 that I want to program with a serial programming cable but my CPS version 16.00.00 wont allow me to change from USB to COM ports.

Anyone?

sheldon

Ok, gone and bought the following items: O3 HHCH O3 head extension cable accessory extension cable and accessory adapter/ignition sense adapter Tell you what, /\/\ just cost me a weeks pay, grrrrrr!!! Will post pics in the appropriate forum when the items arrive and I install the radio into my new 2...

sheldon

All you need is the O3 head and the head extension cable, part #PMLN4958. If you want the accessory connector up where the head will be then you also need PMLN4959, or you can just run wires for ignition sense and the speaker back to the radio location and use the rear accessory connector if you ha...

sheldon

I have an M20QTS9PW1AN XTL5000 high power radio that is currently setup as an O5 remote mount. After purchasing a new car, I have found that I dont have enough room for the O5 remote mounted head and would like to convert my radio to an O3 HHCH setup. My question is: What parts (and part numbers) ar...

sheldon

Forgot to mention, the radio is at present, a remote mounted 05.

Would like to get an 03 HHCH, but funds are tight atm unless a member is willing to provide one and ship to AU without charging a fortune!

sheldon

I recently acquired an XTL5000 380-470MHz 110 WATT Radio - M20QTS9PW1AN At present the radio has the 05 Control Head but I wish to convert it to a W3 HHCH setup. Can someone please provide me with a complete list of parts and part numbers so I can get this underway? Also need the programming cable f...

sheldon

anyone? So far nothing has solved the problem im having.

sheldon

Ok, SERVICE MODE from the radio in question is:

R05.42
CNTLHD20
M01RLM9PW6BN
623AAUxxxx
FLASHCODE
000001-000000-9

If any members would like a copy of the codeplug to diagnose the problem, please PM me with contact details and I will forward a copy of it to you.

sheldon

Motoboy wrote:Is this the same radio you were having problems with last month? Did you try all of the suggestions given?

Reference: http://batboard.batlabs.com/viewtopic.php?f=1&t=94626

/\/\b

Yes, it is the same radio and i did try all the suggestions with no results so im seeking more help if possible.

sheldon

thanks for the reply but i know how the radio is programmed and what features should work when programmed into the buttons. I have multiple zones programmed and the button still does not work along with every other function thats programmed into the radio head. Any other ideas guys?

sheldon

I have a high power MCS2000 remote head model II radio with a DTMF mic. During programming I assign functions to the programmable buttons on both the remote head and also the DTMF mic. I write the codeplug into the radio with no problems. When I reconnect the mic to the radio once it has restarted I...

sheldon

Motoboy wrote:Is this a dash mount or a high power remote mount?

It is a high power, remote mount uhf. Ill give those suggestions a go cause its really starting to p$@% me off now

sheldon

does anyone have all of the factory default tuning settings for a 110 watt MCS2000 uhf radio?

sheldon

I have reprogrammed my MCS2000 with version R02.02.00 of CPS and have discovered that regardless of what functions I assign to the programmable buttons, they do not work as intended. Infact, most of them dont work at all. Each time I reprogram the buttons, its like they just magically change funtion...

sheldon

Is it possible, and how do I to copy a MCS2000 M01RHM9PW5BN radios flashcode into a MCS2000 M01RLM9PW6BN radio without having an identical serial number (by S-record I believe)? Problem I have is that the 25W unit has a fully featured flash and the 110W has H35 only and needs to be upgraded but no d...

sheldon

Here is a copy of the quotation showing the part number.

sheldon

Anyone??? My dealer cant help me, he just keeps saying its the latest version. . . He does not even know what version it is e.g. R02.00.00

sheldon

Yes, you can program and use conventional channels.

sheldon

Just spoke to my local dealer to place an order for the latest version CPS for the MCS2000 and he said there was an upgrade version - RVN4175VR?

Can someone explain what this means? Is it just a newer release of CPS or an upgrade patch?

sheldon

Ok, not sure whether this fits into the "Vehicle/Radio Installs" or "Computer/Technical Assistance", either way my question is as follows: I have a four wheel drive vehicle which I would like to install a Panasonic Toughbook into for radio programming, GPS vehicle tracking and of...

sheldon

Hello, I have recently (last 2 weeks) sent in a second hand XTS3000 MIII for new labels as the original labels were scratched and unreadable. Radio returned to me via a dealer who forwarded it to Motorola in Melbourne, Australia and I had new 'white' labels including matching Flashcode. See http://b...

Search found 58 matches