Hey Everyone, I wanted to see if anyone may be able to help me troubleshoot a problem I caused... :S I am in the process of setting up a 900 Repeater using two Maxtrac 900 Radios, a R.I.C.K and CW-IDer. Well, I screwed up and put about 4 VDC from my CW-IDer into my PTT pin 3 on the RICK Accessory pl...

Ha Ha! Thanks Tom..... I am always that guy who gets into those challenging mods that are the worst......

Do you hapen to know if all the parts above are everything I need?

Thanks,
Ed

Hello All, I have an MTX 9000 and was hoping someone could help me figure out something. I am wanting to use it with the MTVA and an external antenna. My radio was a B5 converted to a B7 programming wise but it seems I am missing the RF switch components and whatever else to get the RF to the MTVA h...

I think I am good on the setup for programming I have right right now using the older ways. The CPS stuff interesting but not quite ready for those challenges yet..... Does anyone have a codeplug for H01WCH4DB7AN ?

Thanks again everyone!

Ed

Can anyone help me obtain a codeplug for a H01WCH4DB7AN ? I would greatly appreciate it.

Thanks!

Ed

Can anyone send me an archive for the MTX9000 900 B7 radio please? I would appreciate it. I think I'll forget about the MTS2000 conversion.

Thanks!
Ed

Hello All! I have a MTX9000 (Model: H01WCF4DB5AN) "B5" radio and would like to convert it to a B7 or is it possible with this model to convert it to a C7 MTS2000? I keep seeing posts and instructions on converting a B5 or B7 to a MTS2000 (C7) but not sure if I can do it or should even try ...

Hey guys, Yeah, still no luck. I tried different PCs (Old Ones of course) and it is almost like the radio has a problem. I cannot for the life of me to get it to even try to communicate with the radio. I verified everything was working with the RIB and RSS with a known good radio and I can read and ...

Hey Mike! Great suggestion..... When I follow that procedure, The screen then comes up with an ERR 0 81 on the display now. If I turn off the radio and turn it back on it goes back to the orginal symptom of all the characters lit up with the top row of icons flashing. To me that is progress to see E...

I actually repaired one of these using a regular Iron for clothing. I set it on low for delicate cloth and pressed one of the edges of the iron on the cable. I put firm pressure on the cable with the circuit board laying on a semi hard absorbing surface like a stack of paper (I used a manual for som...

No luck on any of the above suggestions..... Ugh.... Any other ideas? I just keep getting the dreaded I/O serial error regarding it not being able to communicate with the radio.

Thanks again!

Ed

Hey guys thanks for the info! I appreciate it..... I will give your suggestions a try and post back. I am using true DOS 6.2 and Version 7 on the 386 machine. No worries there..... I am using a DOS boot disk because the Hard Drive is not functioning. Thanks again and I will post back later this even...

Hello Everyone, I am looking for some help on how to fix my SABER II. I believe I was using too fast a PC and something went crazy during programming and not the display lights up completely and the icons above the Alpha display flash on and off constantly. I have been trying to upload a copy of the...