Anyone have a parts list for one of these? Need the upper flow control valve & lower suction port.

You might also watch eBay I have seen a few MCS handsets from Motorola NIB for sale.

I am going by the OEM remote kit instruction manual for that style radio, it does not break down between the 4550 and the 4580..

The OEM remote kit shows 1.04 firmware is required; I think. Interestingly enough I have remoted a new out of the box XPR4580 w/ 1.00 firmware and had no issues..

No .......It will give you a "fail 01/90".
Much like other models the radio "talks" to the control head, when it see's the wrong model than what the harware is programmed for then it does not know how to "talk" to it.

This is not a spectra, the radio has no Idea its remoted... The only issues you ...

The model 2/3 kits can usually be found new on Ebay for about $150. The head cable is the same with the exception you will not have any external speaker connections for the speaker. This means you will have to pin the external speaker off the accessory plug on radio. The only other issue will be the ...

Anyone know if the MCS2000 PA Bricks for the 900mhz models are still available from Motorola. If so anybody have the part number?

Anyone know what the modular port on the back of a XPR 6550 drop in charger is used for?

Yes, they do or at least did a couple of years back offer a civilian model that has a column mounted shifter and no console.

See if this install gives you any ideas.

http://imageshack.us/photo/my-images/855/trunkp.jpg/
http://imhttp://imageshack.us/photo/my-images/855/trunkp.jpg/ageshack.us/photo/my-images/15/2011102113313175.jpg/
http://imageshack.us/photo/my-images/707/20111021133243956.jpg/
http://imageshack.us ...

Thanks all, that was my feeling also, but wanted to get others feedback.

Jim, yes the antenna is mounted on the trunk and the radio (remote MSC 2000) is mounted under the package tray.

I have heard for years that NMO mounts are "tuned" with the correct amount of coax and to not trim much of it off. Now I have a remote mount 900mhz rig mounted less than three foot from the antenna. At this point I have about 15ft of extra coax wire tied out of the way. I would like to cut the ...