Hi there , did you fixed it ?

The manual on the ebay auction is for the R2660 and doesn't have any video board schematics.

Did you sorted it out ? It looks like a short from Power supply unit that is usually cause by bad CRT flyback. Try disconnecting both power and data going to crt board. You will not get display but will be able with beep sound to tell if still reboots. Also did you changed/removed any option boards ...

In addition to this. I end up looking at the r2600 infos for you and all features , according to forums users, doesn't require upgrade beside cell phone .

the Motorola Toolkit CD for the R26xx series is only for later color screen model, this one require removing the U48 and U59 chips in the ad-on boards to update DSP. Unfortunately I do not have V6.XX bin files for the P25 board. Also the emc wont work on a trunking board. the DSP boards are the same...

On R2600A the firmware and Option are stored in two different type of eprom. The firmware is in 5 AT29C010 eprom (U2-U5) The options are stored in ST93c46A chip U43. I think only C-message and phase demod features require hardware mod .. But not the tracking Generator and Enhanced Spectrum Analyser ...

PM SENT !

Thanks VE3HKB for the info !!! That CD is probably what I need; I think it would really help me. Worts a try… Yes ADP (software encryption) and AES-256 were available for the R2670 I have seen KG menu with it. I do have a pic of it. Still wonder if the Modules really require being installed the last...

Hi , I am looking for hardware information on the R2670A service Monitor. 1-The monitor can have ad-on boards at the back of device , one would be trunking option board . what would be the purpose of the second board ? 2-Can the ECM modules (I guest they are the small boards on the last board) be mo...

Dear Friends ,

I am wondering if the option board behind kepad is different from a HT1250 LS and HT1250LS+ ......

This thing seems not documented in the SM .....

thanks in advance !!

There is a Waris technical bulletin for the first hardware revision of the Waris for this according to M a firmware update would resolve the issue not sure what version "fix" the problem . Google might help ... current compatible “allowing 12.5k and 25k programming” FW V5.17 should diminis...

Non R (military radio) submersible radio did exist for the firefighters market they were mainly model IE 2 zones 24 channels version. You need to have, to make a submersible radio a, submersible housing it can be identified two ways: 1 - With the model number on the housing you have to remove the na...

If my memory serves well you need the the good mtsx version (not V2) and a model II S-rec backup. Always backup tuning from radio 1st You backup your current s rec (saves your ass) and the overwrite the radio with the M2 one . Read radio and write again.... The target radio will have now the serial ...

Hi everyone! I am looking for information on low band vhf (1st and 2nd split) Info . I do have the basic and detailed service manual but there is not schematic for the low band neither electronics info ... I am troubleshooting a power issue and wonder what is the power transistor part number used an...

One of the known problems of this radio is that is the volume knob get hits the volume control get hurt. A the end of the setting (high in your case) the control might be “open” make the amplifier to multiply the volume by infinite thus making a squeal . Try changing the power/volume knob if you can...

Ive tried to find such info a long time ago for month ! for a repeater ... You might want look at what we call an EGLI calculator for LOS propagation (vhf and uhf) : there is plenny of online not 100% accurate but .... one one good site is: http://www.netcontrol.com/eng/services/radio-networking-hel...

Start Look at This ham page it might Worth to build it up yourself !

http://www.repeater-builder.com/rbtip/repeater101.html

cheers !

This one is pretty good too ....

http://www.repeater-builder.com/motorol ... index.html

almost same same info

plus it has links to some literature.


cheers !

Since I had no luck finding a saber service manual yet I am trying a last card...
Does someone have a Saber Schematic ?


Thanks for looking in your Atic !!!

Hi Monty , I know this tread is very very old ....

But I am desperately looking for the same manual did you manage to get a copy of it ?
Not a long time ago, I did put an add in the sale/trade forum with no luck yet !

Thanks in advance!

Thanks for the reply , I am aware of the P.A issue I know it needs a really good heat sink and it is always connected to B+ so If something goes wrong it will drain/short the battery. I would still want to proceed with such a design because I already have the radios and I would like to built somethi...

Hi , everyone I am planing bulding a portable repeater out of two saber 1 handhelds. I need to get info on the squelch open/ctss decoder signal to key the TX radio. I would like to get the schematic or the complete service manual to get those signals and maitain radios ...I do have the basic one but...

Hi , Ive found this information In my SM : c. Radio Will Not Keyload(SECURENET radios only) (1) Verify that the correct keyloader is being used for the particular type of encryption present in the radio. Refer to the following chart: (2) Replace the SECURENET module, U900, with a test module having ...

Thanks for the reply Ken, yep they were from same source and forced 146-162....... If I take component (PA, Synth,FDS and 2 pole fiter) from a Saber I 146-162 band split and install them in my Sabers II . Would that make those Saber II working within that split since the core already programmed that...

Hi I just find out what was going on !!!!!! I disassembled two radios and I found out that the FDS , the PA , the Synth and the two pole filters module were all 136-150MHZ band split part number ..... I guest that the previous owner changed the model number in the RSS and this is why they would read...

Hi Edie , Did you programmed and saved keys in the KVL ? When KVL finishes booting or if you press enter if you get 0 ErASEd message on screen this indicates that key memory number 0 is empty. If that is not you issue you can also verify your cable with the diagram on this web page : http://www.kwne...

Hi everyone! I have 4 Saber securenet version II model H43QXJ7139N VHF and I wanted to program for MURS frequencies, I was able to program my radios with 151.820MHZ, 151.880, 151.940, 154.600, 154.570 on My 386 (all cache disabled) computer without an issue. The problem I am having is that none of t...