Batboard

erchambers

Thanks much Alex, hope to talk to you there!

erchambers

Will anyone be doing any APCO 25 VHF?? I did not see that in the list, perhaps I dont have the full list.....if there is a better list, please just PM me. I look forward to at least saying hi to you guys this year, I will be there all three days...

erchambers

Hey guys....

Thanks for the comments, and I appreciate the ideas and the website for the info! any more ideas?

erchambers

Hi all, In less than a year, we will be switching over to the MPSCS digital system. I am hoping that a few of you will be able to answer my question before I start talking to the Motorola people. Right now we are using a MSC 800 Analog mobile as our base, from there we have two remote transmitters (...

erchambers

My 2 cents.... I just within the last 4-5 months switched from Cable to DSL. Around here everyone gets a piece of the pie so to speak on cable. Most of my surfing would be done at night, and that seemed to be the most busy time. There were a LOT of times that I would download at under 1 meg!! This b...

erchambers

Ok, I specificly asked for thoughts on 5 antenna's. I am going to drill 5 holes, I am going to install 5 antenna's! I only was looking for information regarding that. I was not looking for information regarding combiners, on glass antenna's, and everyone's opionion on why I am doing this the wrong w...

erchambers

Also, Correct eventually I will have 5 radios, I will also have 5 antennas on the truck, I just dont want them all to go down the center, should I put them in a box formation, triangle, etc.....you folks here know what I am asking, and how much room needs to be between each antenna....the two 800mhz...

erchambers

You want 5 radios, but "Going down the center in a straight line is not an option here", and you won't use a triplexer. And "I dont want to look like a porcipine". You have imposed too many limitations for a practical install, unless you buy some high dollar covert antennas. Hit...

erchambers

Thanks for the first reply, however that is not an option either....there is be one antenna for each radio, no triplexers or duplexers or anything like that.....but thanks!

erchambers

Ok guys, The time has come that I must drill holes. I have a 1997 tahoe and I need to know where put them and well...how would you do it? Going down the center in a straight line is not an option here(even though this is the ultimate place to install antenna's) I dont want to look like a porcipine. ...

erchambers

I appreciate the responses....Let me just tell you guys what I have going on real quick. I basicly have all my primary ham stuff(repeaters) for all the local counties around, then on the next two zones I have all my simplex frequencies and the on the next 3 are other frequencies. I think I understan...

erchambers

Hi all, I have a mts 2000. Currently I have several "zones" set up, I can only put the radio into scan mode for 1 particular zone. Is there a way that the radio can scan more than just one zone or is that all it can do? I know it all has to be set up in the scan list, but just wanting to a...

erchambers

Anyone on this? My brother has the same truck........Has anyone done installs for this vehicle??

Eric

erchambers

Does anyone here have a MTS2000 Manual that they could shoot to me maybe in PDF format? I bought this radio last year at Dayton from a PO from Canada but no manual.....

Anyone please let me know. My Email address is:

erchambers@comcast.net

Thanks

erchambers

Hi all.....

Just curious is there is anyone in the Ann Arbor Michigan area that could program a MTS2000 vhf for me. If so please contact me off the list at my email

erchambers@comcast.net

Thanks

Eric

erchambers

Tip 1: If you have to ask how to do it, stop. Immediately. Take the vehicle and equipment to a professional installer, or get the help of a knowledgeable friend. ok, so there are a lot of people on here that do installs, why does he need to ask a professional when there are all of you guys here?? T...

erchambers

Ben,

Thanks for the advice, I am watching one now, and I am sending the guy a message, if he cannot test it then I will have to move on to the next one......

I am planning on buying the radios sometime within the next 2 weeks......then the only think left will be a console........

Eric

erchambers

Thanks batdude!!

Eric

erchambers

All I can say is WOW! I am in the very early stages of my radio installs, and I will have the following: 1997 Chevy Tahoe 2 Motorola spectra's 1vhf and 1uhf(ham bands) 1 Kenwood TM-D700A(for aprs and other ham bands) and eventually my laptop for storm chasing! These pictures really give me light at...

erchambers

Model # D43KXA7JA7BK

I looked this model up here on batlabs and it says that it is high band VHF, will this model cover into the ham bands? Sorry if this is a stupid question, but I just was not sure if it would or not.

Tanks!

Eric

erchambers

I gotta say that is SWEET LOOKIN!!! initial response was " thats a lot of lights!" but that is seriously an awesome install....and yes I would like to see the back too!

Eric

erchambers

BNBEquipement wrote:Well guys, I am wanting to replace this thing with an Edge, if you have anyone who needs one of these let me know

Tim

Curious----whats the price?

Eric

erchambers

I think that the Lightbar looks very very nice on that truck!!

erchambers

Just out of curiosity....what speaker microphone works with the GTX 800MHz portable?? and will a Jedi Microphone work with it?

Thanks

Eric

erchambers

Very nice ben, good pictures........But I have one up on everyone here......I have seen it is person, and believe me when I say it looks like the factory put it there. Ben you done an awesome job on it.

Oh yeah, if I did not tell you already, you are definatly hired to to do my truck work!

Eric

erchambers

oops! Bandwidth exceeded!!

erchambers

Thanks! yeah I have some issues, none too bad, next time I see you we will chat about it........and yeah get them pics posted!

Eric

erchambers

Very soon ben.....very very soon!! :) I have found the spectra's so now it is just a matter of getting them. Now I have to find a console and laptop mount. I found where I am going to order the antenna's too! so hopefully real soon.....trust me you will be the first to know when it is time oh yeah, ...

erchambers

thanks kdean7, it will get better I promise, it just might take a while!

Thanks for looking

Eric

erchambers

Hello all! Thanks for being patient with me. In light of Geocities websites not working out, I have now moved everything over to my website. Please do not go to the Geocities website as it will be blank. Instead the new site is: http://www.michigantrunktracking.vze.com Go to the Photo Album, and scr...

erchambers

The techs downed the system is what it was........they did not bother to tell everyone and it went basicly into failsoft mode...........

thanks for everyones help on this one...

erchambers

Thanks for the quick response.......we figured that it was something like that......this darn MPSCS system is getting worse by the day. For the most part it is ok, but latley just SUCKS

Thanks

Eric

erchambers

We currently use the MPSCS System, however in our center last night our radio gave us a STE TRNK error, anyone know what this means???

This is just out of curiousity

Thanks

Eric

erchambers

I have this speaker now hooked up....however I think I need to put a resistor in line with the audio.......where do I do that at? in the speaker? in the wiring outside the speaker? and what size resistor do I use to be able to get the hum down? Any help would be appriciated... Eric-KB8UYC BTW.....is...

erchambers

Does anyone have the wiring diagram for this motorola speaker?

NSN6027A-1

If you do and could make a copy and send it to me it would be much appriciated!

erchambers@comcast.net

\

thanks

Eric-KB8UYC

erchambers

ok, I think the site is working now, dont worry this page will be moving to my new website when i am done with it!

sorry bout that!

Eric

erchambers

Updated the page with additional photos!

Please let me know what you think

http://www.geocities.com/emsdude28

erchambers

Well, the dual band antenna and the 800 MHg antenna are not perminatly installed(the wife just wont let me drill holes yet!! I am still trying) I will have new pics soon, I have since the last pics install my TM-D700a faceplate in the center console on the roof. See the Icom install here on the boar...

erchambers

Click the link to see pictures!!http://www.geocities.com/emsdude28

erchambers

Well for starters, I need to know where I can purchase a console, and what console has seemed to work better for that model. Eventually I will be putting in motorola spectras and A-9 control heads. So for now just info on consoles for the 1997 tahoe! Thanks for your help Eric KB8UYC RACES/ARES/Advan...

erchambers

Hello Everyone! I am sure that it has probably been listed on here before but I am new to this site, and I absolulty LOVE IT!! but I was wondering if anyone had any pictures or ideas for a console, and type of console installs for a 1997 Tahoe(4door) Any help would be greatly appriciated Thanks Eric...

Search found 41 matches

Re: DAYTON 2008!! WHOS IN?

Re: DAYTON 2008!! WHOS IN?

Astro Spectra Consolette question

Antenna Placement

MTS200 Model 3(full keypad) operations question

MTS2000 VHF Manual

Looking for someone to program

Motorola spectra high band vhf

GTX 800MHz Portable question

Re:Tahoe Pictures-Updated Website

Error Code on a Motorola Spectra(digital radio)

NSN6027A-1 Amplified Speaker

NEEDED! MOTOROLA AMPLIFIED SPEAKER WIRING DIAGRAM!

Website

My Tahoe Project

My 1997 Tahoe coming along(sort of!)

1997 Tahoe

Radio console intalls in a 1997 Chevy Tahoe