Search found 39 matches

by OldDawg
Wed Mar 22, 2023 4:41 am
Forum: Radio Programming
Topic: Building phase 2 contact list in APX
Replies: 1
Views: 974

Building phase 2 contact list in APX

Good morning, My first attempt at building a phase 2 trunking call list, or alias list if you will, in an APX radio. Want to be able to display the talking radio's alias, instead of the trunking SUID. I have contacts in the UCL. When I open up the ID to set the Type 2 trunking id, it shows the syste...
by OldDawg
Mon Oct 03, 2022 6:04 am
Forum: General Motorola Solutions & Legacy Radio Discussion
Topic: CDM1250 as a station alerting base
Replies: 9
Views: 7931

Re: CDM1250 as a station alerting base

Is there a way to program these things so the display reverts back to default automatically. I thought that was possible, but I can't seem to make it do so.
by OldDawg
Wed Jul 20, 2022 9:53 am
Forum: General Motorola Solutions & Legacy Radio Discussion
Topic: Mag One BPR40 UHF RX audio howl
Replies: 3
Views: 2048

Mag One BPR40 UHF RX audio howl

I got 2 of these things here I need to fix. The radios DO NOT HOWL, unless the boards are seated in the housings. They do howl with/without external spkr/mic's attached. Speakers are not the issue. Changed them out. 455 filters are not the issue. Changed them out too. Anyone had any success in resol...
by OldDawg
Thu Feb 17, 2022 6:35 am
Forum: General Motorola Solutions & Legacy Radio Discussion
Topic: CDM1250 as a station alerting base
Replies: 2
Views: 2770

CDM1250 as a station alerting base

I donno what I might be doing wrong here........ I have 3 radios here....CDM1250's......all programmed the same.....trying to get an external alarm output across pins 4 & 7. Pin 4 programmed to go low. Programmed for select call.....no switch. Programmed for call alert......no switch. constant 1...
by OldDawg
Tue Sep 29, 2020 3:49 am
Forum: General Motorola Solutions & Legacy Radio Discussion
Topic: Motorola i20R repeater panel
Replies: 3
Views: 6856

Re: Motorola i20R repeater panel

It tells me I don't have permission to view.......
by OldDawg
Mon Sep 28, 2020 4:57 am
Forum: Base Stations, Repeaters, General Infrastructure
Topic: Motorola PURC 5000 w/ASC
Replies: 2
Views: 6960

Re: Motorola PURC 5000 w/ASC

Looking for any help at all for a VHF high power PURC. Manuals.....PA repair parts......complete assemblies...anything. Dire need.
by OldDawg
Fri Sep 25, 2020 7:55 am
Forum: General Motorola Solutions & Legacy Radio Discussion
Topic: Motorola i20R repeater panel
Replies: 3
Views: 6856

Motorola i20R repeater panel

Can anyone help me out with a manual for this puppy?
by OldDawg
Fri Sep 25, 2020 7:41 am
Forum: General Motorola Solutions & Legacy Radio Discussion
Topic: HLN3333B with non-Motorola radios
Replies: 0
Views: 9416

HLN3333B with non-Motorola radios

Has anyone had any luck interfacing the HLN3333B with non-Motorola radios at all?
by OldDawg
Fri Nov 08, 2019 8:34 am
Forum: Motorola Digital and Voice Paging
Topic: Motorola Advanced Simulcast Controller
Replies: 3
Views: 7182

Re: Motorola Advanced Simulcast Controller

CLOSE this up. Got manuals.
by OldDawg
Fri Nov 08, 2019 8:33 am
Forum: Motorola Digital and Voice Paging
Topic: PURC 5000 VHF high power - need SM
Replies: 0
Views: 9624

PURC 5000 VHF high power - need SM

Good morning, Looking for a hard or soft copy of the VHF high power PURC 5000 manual. Troubleshooting a low power output. Seeing 4w out of the driver. I seem to remember it's supposed to be up around 11, but can't confirm without the manual. There's a metering jack under the cover, but again, I don'...
by OldDawg
Wed Oct 30, 2019 9:35 am
Forum: Base Stations, Repeaters, General Infrastructure
Topic: Motorola PURC 5000 w/ASC
Replies: 2
Views: 6960

Motorola PURC 5000 w/ASC

Looking for manuals or any other reference material I can get my hands on for the PURC5000 vhf high power paging station with the advanced controller.

Any help would be greatly appreciated.
by OldDawg
Sun Oct 27, 2019 6:18 pm
Forum: Motorola Digital and Voice Paging
Topic: Motorola Advanced Simulcast Controller
Replies: 3
Views: 7182

Re: Motorola Advanced Simulcast Controller

Of course. We acquired a paging system, using a Zetron 2200 and an ASC with a single PURC tx. After moving all the hardware to our location and installing it, it seems we're missing the ASC / 2200 cross connect info. I don't even know why we need the durn thing, with only 1 transmitter. There's also...
by OldDawg
Sat Oct 26, 2019 5:23 pm
Forum: Motorola Digital and Voice Paging
Topic: Motorola Advanced Simulcast Controller
Replies: 3
Views: 7182

Motorola Advanced Simulcast Controller

Might anyone have any reference material at all on the Motorola ASC? I'm up against the wall with a problem here, and a Google search returns Z E R O results.

HALP!
by OldDawg
Fri Dec 28, 2018 6:57 am
Forum: MotoTRBO Portables and Mobiles (3xxx/5xxx/7xxx/SL) 2.0 Series Subscribers
Topic: Password protected XPR5550e's
Replies: 2
Views: 6190

Password protected XPR5550e's

So we got a bunch of radios in trade that are all password protected. Has anyone had any luck rooting out the password using a hex editor at all?

If so, details on how that's done would be greatly appreciated.
by OldDawg
Mon Oct 01, 2018 10:14 am
Forum: Radio Programming
Topic: CDM flash updating
Replies: 1
Views: 6564

CDM flash updating

I donno what I'm doing wrong here.....I hit the "program" button in the mobile fw application....the radio beeps.....shows "program" on the display.....press on/off 2x, waiting a second between presses, and the radio won't go into the bootstrap mode....it powers off after the 1st...
by OldDawg
Wed Jun 20, 2018 8:58 am
Forum: Radio Programming
Topic: MTS2000 programming
Replies: 8
Views: 10414

Re: MTS2000 programming

Yes we have what we need.
by OldDawg
Mon Jun 18, 2018 4:44 am
Forum: Radio Programming
Topic: MTS2000 programming
Replies: 8
Views: 10414

Re: MTS2000 programming

ty kindly
by OldDawg
Thu Jun 14, 2018 9:20 am
Forum: General Motorola Solutions & Legacy Radio Discussion
Topic: MTS2000 Tuning Help
Replies: 5
Views: 4091

Re: MTS2000 Tuning Help

What's the trick to applying the softpot values so they "stick?" I use the "program" button, and then "close" the tuning window and exit out of the tuner, and the values don't take.
by OldDawg
Thu Jun 14, 2018 6:56 am
Forum: Radio Programming
Topic: MTS2000 programming
Replies: 8
Views: 10414

Re: MTS2000 programming

Ok, I was able to access the radio with a 32 bit machine. TY.

Anyone familiar with the Tuner application? It seems the changes I am making to TX output are not being saved, even though I'm applying the changes with the "PROGRAM" button in the window.
by OldDawg
Tue Jun 05, 2018 10:49 am
Forum: Radio Programming
Topic: MTS2000 programming
Replies: 8
Views: 10414

MTS2000 programming

I have the dos version of the cps, and I have windows v2.3 as well. If I read the radio with the dos ver, it tells me the codeplug is too new for the ver of cps. When I connect it to the windows computer, it won't connect using the same hardware I was using on the dos computer (rib, cables, etc) Any...
by OldDawg
Tue May 29, 2018 9:05 am
Forum: General Motorola Solutions & Legacy Radio Discussion
Topic: CDM1250 TX / RX issues
Replies: 3
Views: 3316

CDM1250 TX / RX issues

I have a 1250 with an issue I've never seen before. No rx and a noisy tx.

Anyone ever seen that before?
by OldDawg
Wed Feb 07, 2018 10:03 am
Forum: Consoles
Topic: Wanted - GOLD ELITE CEB boards
Replies: 1
Views: 13653

Wanted - GOLD ELITE CEB boards

Need B1423 DR modules. If I could get a B1825 ACIM kit, that would be great. Otherwise, need a BLN6664B Aux 1 card, a BLN1215A ACIM, a BKN6145 interface cable and a B1840 BIM.
by OldDawg
Tue Jun 20, 2017 11:28 am
Forum: General Motorola Solutions & Legacy Radio Discussion
Topic: MSF5000 PA Question
Replies: 18
Views: 7969

Re: MSF5000 PA Question

Might anyone have the part # for the high power (350w) PURC5000 PA? I have to troubleshoot a bad one and I don't remember what the metering is without the book.........and I don't have a book.......
by OldDawg
Tue Jun 20, 2017 11:05 am
Forum: Base Stations, Repeaters, General Infrastructure
Topic: Motorola PURC 5000 350W Amplifier - Specifications?
Replies: 6
Views: 4280

Re: Motorola PURC 5000 350W Amplifier - Specifications?

can I BUMP this up after all these years.......Does anyone know what the proper metering is for the high power VHF PA?
by OldDawg
Tue Mar 07, 2017 11:40 am
Forum: ASTRO25 Series (XTS/XTL 1500/2500/5000) Subscribers
Topic: PR1500 power up issues
Replies: 0
Views: 2933

PR1500 power up issues

Got a PR1500 here......won't power on unless you leave the power switch on, and then disconnect and then reconnect the battery.

Weird. Never seen that before. Has anyone got any feedback on what the issue might be?

Semper Fi
by OldDawg
Thu Dec 29, 2016 7:14 am
Forum: Consoles
Topic: [Any info on CIE addressing]
Replies: 2
Views: 6339

[Any info on CIE addressing]

Any info on CIE addressing??

I'm at a point right now where the GUI won't take the database...any database......it tells me persprom sync......and it hangs @ 99%. If I shut it off and restart it I get an internal communication error.

This is maddening.
by OldDawg
Mon Dec 26, 2016 8:45 am
Forum: General Motorola Solutions & Legacy Radio Discussion
Topic: Gold Elite CRT
Replies: 3
Views: 3145

Re: Gold Elite CRT

Updating... I made a simple change to an existing CEB resource in the DB, and I can't seem to upload it, so I want to: 1.) Get rid of the OP2 COIM, and setup the remaining good CIE for OP1 use, so I'm working with the primary dispatch pos. I don't know if the reason I can't upload is because I'm wor...
by OldDawg
Thu Dec 22, 2016 10:33 am
Forum: General Motorola Solutions & Legacy Radio Discussion
Topic: Gold Elite CRT
Replies: 3
Views: 3145

Gold Elite CRT

Aquired a gold elite CRT system, 2 op positions complete w/ceb. The GUI is telling me there's no connection between the CIE & CEB. I've tried all possible connection configurations, cables, etc. One of the CIE's is dead, so I'm working with the good one, but I don't know if it has to be addresse...
by OldDawg
Wed Oct 19, 2016 9:24 am
Forum: General Motorola Solutions & Legacy Radio Discussion
Topic: DMR emission code
Replies: 7
Views: 4519

Re: DMR emission code

ya I got that from the chart.....I was wondering if the codes were the same for simplex dmr channels...
by OldDawg
Wed Oct 19, 2016 7:56 am
Forum: General Motorola Solutions & Legacy Radio Discussion
Topic: DMR emission code
Replies: 7
Views: 4519

Re: DMR emission code

I would make note of either code for reference
by OldDawg
Tue Oct 18, 2016 8:42 am
Forum: General Motorola Solutions & Legacy Radio Discussion
Topic: DMR emission code
Replies: 7
Views: 4519

Re: DMR emission code

so what would NB simplex DMR voice be.......12K50FXE?
by OldDawg
Mon Oct 17, 2016 10:58 am
Forum: General Motorola Solutions & Legacy Radio Discussion
Topic: DMR emission code
Replies: 7
Views: 4519

DMR emission code

Mods, if this isn't in the right form, apologies.

Does anyone know what the proper FCC emission code should be for narrowband 2 slot DMR operation, and for narrowband, single slot dmr operation?

- Sarge
by OldDawg
Fri Oct 07, 2016 6:42 am
Forum: Radio Programming
Topic: prog/flash adapter for Mot Commercial mobiles
Replies: 2
Views: 2637

Re: prog/flash adapter for Mot Commercial mobiles

oh ya? Not for nothin, but I tried that before posting here.
by OldDawg
Thu Oct 06, 2016 10:47 am
Forum: Radio Programming
Topic: prog/flash adapter for Mot Commercial mobiles
Replies: 2
Views: 2637

prog/flash adapter for Mot Commercial mobiles

Anyone got a diagram for the programming/flashing adapter for the Motorola Commercial series mobile radios?
by OldDawg
Wed Sep 07, 2016 4:34 am
Forum: General Motorola Solutions & Legacy Radio Discussion
Topic: Centracom Gold Elite
Replies: 3
Views: 3538

Re: Centracom Gold Elite

*bump* up When you ASSume, you make an ASS of yourself. I don't work with the Gold Elite enough to know all the ins and outs. I just assumed that what we wanted to do was possible. Now that we're ready to move, we're finding out that there are limitations. Is there any solution available with this G...
by OldDawg
Thu Aug 25, 2016 11:24 am
Forum: Radio Programming
Topic: Pro radio flashing adapter
Replies: 1
Views: 2475

Pro radio flashing adapter

Is the flashing adapter for the pro radios a simple little switchbox or are there electronics inside? I need to make/acquire one....
by OldDawg
Tue Aug 23, 2016 5:20 am
Forum: General Motorola Solutions & Legacy Radio Discussion
Topic: Centracom Gold Elite
Replies: 3
Views: 3538

Re: Centracom Gold Elite

Can it be done with "standard" hardware vs "SP"?
by OldDawg
Tue Aug 16, 2016 12:07 pm
Forum: Radio Programming
Topic: MOTOTRBO - Firmware Upgrade
Replies: 2
Views: 3360

Re: MOTOTRBO - Firmware Upgrade

me please
by OldDawg
Tue Apr 05, 2016 1:49 pm
Forum: General Motorola Solutions & Legacy Radio Discussion
Topic: Centracom Gold Elite
Replies: 3
Views: 3538

Centracom Gold Elite

We want to try to reconfigure a Gold Elite console.

It currently has a T22R and a T44R node, with 2 T1R1 SP nodes for the transmitters. We want to turn one of the Quantars into a T12R12, and the other into a T77R. Is this possible? The only node choices in the CDM are the T22r & T44R.

thx

Go to advanced search