Batboard

mfdeng5

Im on my second set of shortys from CutRate, first 2 lasted 4yrs on my Astro Sabers!! Lotta desk time but still a great battery for good price. Just got 2 more in Oct and seem to be great also?

mfdeng5

Merry Christmas all, i have a uhf 1250 that has an issue? Powers up fine but when i squeeze radio (even gently) it powers off till i let go? Tried it with multiple batteries and same thing occurs? A friend changed the flex and it didnt change anything? I dont know history on radio, if housing was ch...

mfdeng5

Yep! Gotta do a firmware update to support it. Thx guys

mfdeng5

Hi all, trying to use an RSM XE on my APX7000, when i connect the mic the steady red led stays on? I get audio and can transmit just cant shut the led off??? I realize its for the APX XE but can it work on my APX7000? Thx guys. Kevin

mfdeng5

A million thx guys! Gave me some great ideas, will post pics when finished. Kevin

mfdeng5

Thanks Jason, goonna look in to that! Kevin

mfdeng5

Thx guys, the boat pics are a start for sure, gonna be a pain to line up screws on backside of speaker to be straight!!! Any other pics will be helpful, thx again all. Kevin

mfdeng5

As stated, I want to flush mount some Motorola mobile speakers in a console, not sure the best way to do it? Any pics out there or ideas? Thx Kevin

mfdeng5

OK, just got it going! de-powering it and re-powering it did the trick? Go figure, havent played with one in a while....Thx guys. Happy Holidays too all.

mfdeng5

I have it set to advanced head, its still scanning through all the modes? No audio, cant stop scan, mon light stays on???? im going nuts!

mfdeng5

Thanks Duke! Gonna do that later will let u know

mfdeng5

Hi all, scooped up a NIB old stock low-band Maratrac. Date code i believe is 2003? I hooked it up on my bench read it with my old laptop, programmed it up fine. After i sent info to radio it would go to a scan mode through all the channels? Iam unable to control any of the buttons on the head? I rea...

mfdeng5

Hi all having a problem with my SVR200, i cant get it to power once connected to the CDM? I have a cable from Pyramid as well as an after market bought on the flea. Im not very good at these pin-out things to begin with! Anybody assistance would help. Please PM me.

mfdeng5

Hi guys, just put the MDC board in my 2ch Comtegra. It seemed to work right away, showed some IDs and so on. Than i played with the MDC button on the Comtegra!!! Several choice are available after pushing this button.....anyone know how i can get this back to displaying MDC again? PM would be great!

mfdeng5

Great thanks for help.....i new it was missing it LOL....got an extra board? Kevin

mfdeng5

On the main board does anyone have location of MDC board?

mfdeng5

Is an Impres charger OK also for lit-ion?

mfdeng5

Hi Guys, Happy Holidays!! Im looking for one of those shorty batteries for my Sabers, i found a Lithium-ion made by Cut Rate Batteries? Its a 7.2v 1950 mah. Anybody have any luck with these? Or am i wasting my money.....$71 shipped. I was told Motorola no longer makes those anymore...that true? Kevin

mfdeng5

Ok....That helps to get me started!!! Thanks alot i will let you know how i make out. Kevin

mfdeng5

Lovely!!! Thats what im afraid of.....the power issue! How did you end up running it? Kevin

mfdeng5

Hi Guys just bought new civic and want to put a Turbo mobile UHF in it.....anyone ever put anything in a civic?

mfdeng5

I give up!!! It cant do what i want it to do...wrong split!!! Anyone want this? I got it from him on ebay for $45+shipping=$57.......Its new in the box!!!!
I will take $40 for it......

mfdeng5

Hi Guys, i bought one of those NIB Maxar 80s on fleabay.....they are in sealed boxes!!! Could not believe it. Well anyway i made a mistake they are 31mhz split not 46mhz which i wanted (got caught up in moment and didnt read specs) Did anyone ever change a board out to get the higher split? I need i...

mfdeng5

Just went to load a codeplug into my xts3000 and it came up Fail 01/82......is their a way to un freeze this? I tried reloading codeplug.....still frozen.....

mfdeng5

Hi guys im looking for the external speaker pinouts on the accs connector on my XPR4500.....Thanks

mfdeng5

Hi Guys have a 4500 TRBO radio...im looking for a listing of the pinouts in the accs. connector.....specially looking for the external speaker pins......Thanks

mfdeng5

You Guys are the best!!!!!! Both replys did the trick!!! Thanks Guys!!! Kevin

mfdeng5

Hi guys, i have an A-9 Spectra ive had for a while.....i decided to hook up a dual head to it. I connected my other cable to the dual head HCN1076D (Rear).......i went into software and enabled Dual Head i named the remote name and all.......when i programmed it the main head is fine.....the REAR He...

mfdeng5

Thanks Guys!!! RPDM313, sorry for taking up your time.......

mfdeng5

Hi guys, i have a UHF A-9 Spectra, i took off the front of the chassis and put an A-5 head on it....it powers up but only says mode # and so on....will this work as a regular A-5 if i program it up? Kevin

mfdeng5

Hi guys looking to hook uo my Motorola TNA200 tone remote to my XTL2500, ive seen pre made cables for CDMs do they make one for an XTL? Thanks

mfdeng5

I HAVE AN ICOM MODEL# IC-F2020-2.....ANY IDEA UHF VHF?

mfdeng5

hi guys I just found out its a Ht 7150!!!!! Is their a separate software? Ok

mfdeng5

Thats a good ?, im not sure how old radio is? im gonna try different CPS and see....I shall return.....KK

mfdeng5

Hi guys, just tried to read a HT-1250 UHF i took on trade after several attemps to read with CPS i keep gettig ERROR 4-1379......any ideas????

mfdeng5

Hi guys, another stupid ? which side is logic board and where is pico fuse??? Kevin

mfdeng5

In the RSS i have to program ignition sense??

mfdeng5

Hi guys, im looking to power my maxtrac off of the ignition, right now its on constant power...i have a 16 pin connector all ready to go (pin 10 hot lead to back power connector) is there a fuse inside of radio i must disable?? Kevin

mfdeng5

Hi Guys, ready for this one? Anybody out there able to program an 8ch VHF Mostar for me? These are done through an e-prom right?

mfdeng5

Hi, guys, just bought a new old stock 2 ch P-200....it is currently a 2 ch radio....how do i make the mod to make it a 6 ch radio? Thanks

mfdeng5

Oh and yes i have PLs programmed in these chs......

mfdeng5

Hi guys, i have a NOS Systems Saber uhf i got at Dayton 2yrs back, i hve programmed a couple of channels in it twice and both times it receives but i have to hold down the rat button that opens the squelch????? I look at it the red busy light is blinking and i need to hold thta button in to hear????...

mfdeng5

Hi guys, have an 800mhz Spectra D35kga5jb5ak.....after radio is powered up for a while it looses audio? I have it in a bas etray with the speaker connected, sounds great for a while and than she goes QUIET???? Any ideas...KK

mfdeng5

Hi guys im looking to hook my MCS 2000 up to a Motorola Tone Remote, i already have a CDM to it but id like to take that off and put the MCS on it...
Can i use the cable i have that goes from the pins on the CDM to the Tone on the MCS?? Or do i have to get a different cable......

mfdeng5

Hi guys i have an Astro Spectra A-4 (rotary) uhf unit....i was wondering can i put this unit into an existing spectra consolette i have??? Meaning can i swap out chasis radio for radio? I think i will have to do the heads too right?? Any advice before i blow it up

Kevin

mfdeng5

HI EVERYONE, CAN I PUT AN A-5 CHASIS IN MY CONSOLETTE, I THINK THE A-7 IS BAD AND I WANT TO TRY ANOTHER RADIO??? HAPPY NEW YEAR ALL.....

mfdeng5

HI GUYS, BEFORE I ORDER ONE AND GET ROBBED...CAN ANY TECH MAKE A CABLE FROM A RADIUS/MAXTRAC TO A PYRAMID SVR? KEVIN

mfdeng5

How do you change the tone remote tone assignemts for the consolette.

For some reason when keying the comtegra, the spectra TX's on mode 3.

Thanks, Rob

P.S. The tone remote is built-in the consolette.

mfdeng5

Anybody familiar with repairing these?

mfdeng5

Thanks all!!!!!

Search found 63 matches