Batboard

Dispatcher85

Has anyone had any problems with the antenna staying on the pr860 portables? I just sold 2 and it seems like the antenna stud is not long enough to stay on the radio. When you twist the antenna on the top it will only turn about a quarter turn and if they are bumped and turned a little they fall off ...

Dispatcher85

I am getting an error on a syntor/maratrac radio that is saying "error 6/10" when you turn the radio on. After a few minutes in disappears. Anyone know what this is?

Corey

Dispatcher85

I am getting an error on a syntor/maratrac radio that is saying "error 6/10" when you turn the radio on. After a few minutes in disappears. Anyone know what this is?

Dispatcher85

Just installed a new board that I recieved from a pager repair shop. customer told me that the low battery alert keeps going off. Customer stated that he tried new batteries and the problem still persists. Any suggestions?

Dispatcher85

I have a Minitor II Lowband 46 mhz that needs to be switched to VHF high 155 mhz. Anyone that can help me out please let me know.

Corey

Dispatcher85

Ok, Thanks for the info!

Corey

Dispatcher85

Is anyone able to do an inband freq. change for an MT500? Currently has 4 Channels programmed and all 4 need to be refreq'ed. Please let me know.

Corey

Dispatcher85

Thanks for the quick reply. I looked at the bottom of the pager and the id tags are missing off the housing. Is the model number stamped on the pager board anywhere?

Dispatcher85

I have an old minitor II that needs the frequency changed. The minitor was bought off of ebay and the seller did not know the exact frequency but, stated that they thought that it was low band. I took the pager apart, called Motorola and tried to cross ref. the crystal. Motorola told me that they ...

Dispatcher85

I just got a minitor II SV from a friend. He told me that the pager had some problems and if I wanted to try to fix it I could have it. To my finding the pager has 2 problems. 1. It dosent alert when tones are set off 2. Depending on how I hold the pager it has really bad audio out put. What I mean ...

Dispatcher85

Can anyone tell me the requirements for getting started in Motorola two-way sales?

Dispatcher85

I need to know the antenna connector that goes from the radio into Pl 259 antenna cable? Can anyone help?

Dispatcher85

Well, fellas I got and update. I went to dispatch one of the local police departments on a cardiac arrrest the other night. Took me 10 minutes until the officer heard me calling. The local vounteer ambulance was slow getting out. Luckily there was a local fire chief that heard the call, went to the ...

Dispatcher85

Wowbagger,

your the man. we tied the ground strap to the unit as you said and it works great. Thanks alot for the info.

Corey

Dispatcher85

Yeah, its a digitize brand alarm. I check the humidity in the room and it was 26.

Dispatcher85

40"??? Ok, thanks guys for the help I just thought that there was something a little smaller. Thanks again, Corey

Dispatcher85

How about static spray anyone familiar with it. I know I have alot of questions but, I am new to all of this.
Corey

Dispatcher85

I there something like a static mat or something that we can put near the digitizer to stop the problem.

Dispatcher85

Hey guys have a weird question for you. Our dispatch is equipped with a digitizer for box alarms. Seems of late that when someone touches the system to send out the alarm, static electricity from the dispatches finger shock the system and shut it down. At this time the system has to be rebooted ...

Dispatcher85

As I stated to you all before I am new to the radio word. I have a Maxtrac Low band mobile-42 to 50 mhz and want to get a smaller type antenna than what I have currently. As of right now there is a big whip antenna on the top of the vehicle. I would like to get something shorter and sleeker. Any ...

Dispatcher85

Well to be totally honest with you, I am not really sure how old they are. I am just a dispatcher for the 911 center that the tower is attached to. I am not sure if they ever checked the sensitivity. It just really sucks because they were told numerous times about the problem and seems like they ...

Dispatcher85

Anyone here an update on this?

Dispatcher85

Thanks guys....

Corey

Dispatcher85

Your so right basically I am SOL. The system is a voted system with tower site equipment that is probably as old as I am. The only problem is it is contracted out to a communications shop in the local area whos owner is very big in the political game. So unless we go to the county commisioners and ...

Dispatcher85

I bought a minitor IV while back and thought is was a two channel. when I received the pager I realized that it was only a one channel. Is there any way to make it a two channel. I thought I saw something on here a while back. If not oh well just have to deal with it......

Dispatcher85

Well, they do have speaker mics for the radio but do not use them anymore so that not the problem...but good point. I also suggested the speaker mic with the antenna on the mic head but, I am not really sure if that is going to make a difference. Their mobile radio is a CDM1250, Will a R.I.C.K. work ...

Dispatcher85

Yes, I know I am not really good and getting my point across. We are currenlty on Vhf freq. Officer can get out on there mobiles but, not as well on the portables. The place that they are really bad are inside of a residence. Pretty bad huh, when the tower is in sight of the house.

Dispatcher85

My local police deparment wants to put a repeater in the cruiser to have better rx and tx clairty and better overall range. the radio that they currently have in the car is a cdm1250. What is the best way to go for the install and what parts do I need. Any suggestions?

Dispatcher85

The pager has never been exposed to water that I know of. That is what puzzles me? And if it was it was a real small amont. The pager works it just that when it gets bumped the battery gauge goes low and the light is real dim.

Dispatcher85

Have an advisor gold, when bumped the battery gauage shows the battery as being dead and if paged it only chirps instead of being alerted to the set duration. It was taken apart and the local dealer and they stated that one of the chips that moisture in it. Is there a way to fix this rather that ...

Dispatcher85

I am interested in getting to know the in's and out's of radio electronics. Anyone know of any good sites to go to that will teach the basics?

Dispatcher85

Oh let me tell you this so called "dealer" is shady. He is the only dealer in the area and believe me he takes advantage of his costumers. Believe me I would like to give him a tour of the alley!!! Hahahaha

Dispatcher85

Can anyone tell me how to soldier it myself or instruct me how to do so?

Dispatcher85

Dumb question but I thought minitors needed a set of two tones to activate the pager? I am new at this so go easy.....

Dispatcher85

Our fire company has had minitor III's for a couple years. Have had problems with the from day one. I just took one to be repaired at the local motorola dealer. The problem was that the you could hear our tones loud and clear howver, the pager would not alert. I was told earlier that the chip ...

Dispatcher85

Did you ever do any that went with a wider freq change like say 154-165 mhz. I have never done alignment either.

Dispatcher85

I was wondering how hard it is to refreq a minitor II. I have a couple that need to be changed and I would like to do it myslef instead of sending it out. Thanks...Corey

Dispatcher85

I am not familiar with Radtek's site. What is the URL? Thanks

Dispatcher85

When tones go off squeeze the pager together and see if it works then. I the chip in my minitor III came unsoldiered and it would not go off. Just a thought....

Dispatcher85

Does anyone know where I can find service software for the GE S825 Mobile radio. I cannot find anyone that sells it. Probably cause it is so old. Thanks

Dispatcher85

This is the same thing that is happening to mine. Read the thread "Minitor III problem" After squeezing the pager it works fine. I am just afraid to do it myself.

Dispatcher85

I see. I would still be interested in knowing where the cpu is located. If any one can provide this info please reply.....thanks

Dispatcher85

So I take it your saying dont mess with it and I will make out better? hahaha

Dispatcher85

Well you are da man!!!! That worked but, I am not familiar where the cpu is. Can try to describe it to me......Thanks alot!

Dispatcher85

Just reprogrammed the codeplug and the pager still doesn't work. Guess I have to send it back to get fixed. Now can I send it to Motorola or do I have to give it back to the dealer that we bought it from?

Dispatcher85

No, I am going to try that now. Thanks I let you know if that works....

Dispatcher85

Well I just tried putting it on selection "c" which is the vibe and that didn't work either. Like I said the pager recieves fine so I dont think that it is the antenna.

Dispatcher85

No, Actually we have an tone encoder and I am trying to set it off as we speak and it will not go off. The guy who owns the pager states that it worked and then just stopped alerting.

Dispatcher85

The pager recieves fine just dont alert when pager tones are hit.

Dispatcher85

Have a M3 that does not alert worked fine until like two days ago. Anything I can do without having to send it back? Checked the programming and everything is still ok there. Thanks............

Search found 55 matches