Batboard

First thing I would check would be the pico fuse....

I've been experimenting with sort of the same process, made a bootable CD with the image thats bundled with Nero that boots a version of DR-DOS with USB support, with a bunch of RSS programs on the same CD, and I've had limited success, some programs work, Maxtrac, RadM100, SM50, SP50.....while othe...

Fairly common problem among Jedi radios, do a search for HT1000 microphonics, sounds like thats likely what your issue is

http://batboard.batlabs.com/viewtopic.php?t=42372

I have had literally hundreds of GP350's come by me over the years, and I have never seen a golden back cover on one...

You have to set your personality for VOX under the options tab I believe, and set your hot mic source to accessory connector under radio configuration.....

Droool
Very jealous!

Krylon Fusion paint from Walmart

Andy2712 wrote:I know this is going to be a silly question, but has anyone started messing around with Windows 7?

I've had EXCELLENT luck with Windows 7, I'm even running 1225 series RSS on here!

Right on....sounds right to me, thanks!

Came across a few CDM's in the last little while that had a option board in them, the option board is the same board that HT1250's have in them for touch tone in the front cover, the ones in the CDM's even have the keypad lights that the HT1250 boards have....

Whats the point of this?

I agree totally...
I dont want want my name attached to mickey moused bluetooth system if that sh*t ever decided to hit the fan, for safety and liability reasons....

Heres my situation, One of my local fire departments called me and said they want to buy 2 "UHF bluetooth mobiles" Unless I missed a product debut or something, no such thing exists, other then the Jedi/XTS bluetooth adapters.... So im looking for suggestions, because it looks like im goin...

Any quick suggestions for a UHF M1225 with poor rx sensitivity? thanks

The bigger issue is that patched trunked radio audio sounds like butt, unless you spend a lot of time doing level adjustments. When the patch is trunk-->trunk or trunk-->P25, it sounds even worse and is even harder to equalize. For just this reason alone you're better off sticking with simplex anal...

You were right on the money, soldered a jumper between Pin 10 and the ring ground and it worked first try....

revised picture, based on MotoFans original:

Using the pinouts here, I can get my radio to go into "keyloading" mode on the screen but it fails

Im using a old STX speaker mic with:

KVL - to Saber
9 - to - 10
8 - to - 9
7 - to - 5
6 - to - 11

gonna start banging my head off the desk soon

its gonna be a long day, I hate these more then GP68's.....

Does anyone have a PDF service?

Got a 3 of these I would like to get back monday, so if anyone can help me locate the above discussed components.....never seen so many cold solder joints in a radio....fixed a few already, but audio is very distorted on 2 of them....thanks

That is the setup I use, Pin 1 and splice into the internal speaker jumper, I havent noticed any audio quality problems either afterwards, I use this setup to have the internal speaker remain working in the cab and to run a external speaker mounted outside at the pump panel on fire engines....

Hit the Win+R keys together to open the run dialog. Type gpedit.msc to open the local groups policy editor. http://www.killertechtips.com/wp-content/uploads/2009/05/device-driver-signing-disable.png Expand ‘Administrative Templates’ (it’s under ‘User Configuration’). Expand ‘System’. Click ‘Driver I...

Does anyone have any codeplugs, the software doesnt seem to come with any sample codeplugs?
ve9mp@yahoo.ca

Made for the Canadian market, but I heard they were also used by some federal agencies in the US.... Great radios, I still have a couple remote mount MCX's kicking around, the RCMP here still use them in their patrol vehicles, even new builds that come on will still get MCX1000's installed, they mus...

I have the elusive C4 top display, 255 mode, continuous rotary MTS2000 here in front of me

Im pretty sure these arnt the real NTN9000B chargers, I dont have one to compare right at the moment, but if memory serves these do look different inside....anywhom....traced the problem to a bad resistor....replaced and voila!

Are GP380 charger bases electrically the same as the HT1250 ones? I have 3 NTN9000B chargers I got with some GP380's and they came with the european 220 wall warts (16 volts output), I junked those and tried a 16V output adaptor I have for my PR400, and also a 13.8 volt one for a GP300 rapid charger...

Thanks again Bob!

I just know it has no output and its currently using an external power supply, havent really looked into it yet, but someone dropped me a PM and said a shorted small value capacitor on the reference pin of a regulator IC is what gave him trouble on the ones he worked on, so ill check that and report...

Need a desktrac service manual, have one i'm rebuilding, although the radio portion of it is pretty straightforward, I could still use the manual to fix some power supply issues I have......

ve9mp@yahoo.ca

What is this? Micor era, receiver pre-amp?

The only thing I can find is proper code detect....is that it?

Im on a SZOL system, theres a few users on a single talkgroup running P25 and DES encryption.....now what im wanting to do is to be able to listen to the encrypted noise of the people using a different key then I am so I dont talk over them...because right now my radio gives me no indication that th...

See if these folks can help you out...
http://www.ptsupply.ca/

I thought it did, but just wanted to make sure......Model 5 encoders at the moment and looking into 45B controllers or some DAPT's here shortly....

Does anyone happen to have a chart or matrix or know how to convert zetron paging codes to tone frequency format....

403-470 MHz

lol

Broke down and tried it...
Works the very best on 32 bit Vista Home Basic.....

Motorola Trunking Professional CPS
Latest Release: R02.00.02
Part Number: HVN9067

Does anyone have a list of the buttons and part numbers for an MCS2000 M2? MOL says refer to service manual for the pushbutton parts! I'm looking specifically for: Zone Up Zone Down Dim Del Thanks! Discr Color Size A Size B Size C Size E Delete Black 3805230Z35 3805231Z35 3805232Z35 3886267A14 Dim ...

Re: Version 05.03.00 CPS for Astro released *Home Basic I mean...

*Home Basic I mean...

Has anyone tried this release with Vista Basic?

I asked RayRay about it, who is now a Kenwood dealer about it but he never got back to me

After owning and using both HT1250's and TK-2180's...sorry Moto, but the 2180 wins hands down both performance and ruggedness wise.

Anyone care to share the details on how to make a 2180 FPP'able?

Looking for a pdf of the operating/programming manual for a Zetron Model 45B Z-Patch....

ve9mp@yahoo.ca
thanks

It has nothing to do with CPS or firmware. The "low powered" CDM will adjust from 1-25 watts in UHF and I believe 1-30 watts in VHF. The "high powered" CDM will adjust from 20-45 watts (maybe 50 in VHF?). If you need low power, get a low powered CDM...they are better suited than...

Must be some differences between firmware or CPS releases?
CPS 6.04 allows me to go right down to 1 watt, with the all the different CDM1250's and a 1550 I have kicking around, on both VHF and UHF models

As far as I can tell from looking at the UPI schematic, the UPI is more complicated then its needed to be....you should be able to build/buy a much simpler interface for about 20 bucks give or take... You should be able to get away with using something like this: http://cgi.ebay.com/ws/eBayISAPI.dll...

Does anyone have an Advisor Gold codeplug I could play around with?

ve9mp@yahoo.ca thanks

Contacts are the same... it does indeed work....

Perfect!
Thanks man!

Search found 265 matches