Recheck accessory configuration set to on/off ignition sense, boot down with front button after program change. Now radio will boot with out pin 10. apply main power radio will boot ( may have to push front button firt time on some units. Now toggle power on main cable. depening on firmware radio ...

I have noticed early on with the installs rthat some models were more prone than others to that boot mess. Like I stated once I jumped 7&9 the problem was gone. I went back and installed the jumper in the previous installs. We have lows, vhfs & uhfs. About nine or ten have R*I*C*K s connected and ...

Jumping pins 7 & 9, 7 being ground and 9 is for an emergency switch to turn radio on without ignition sense. The Warius mobiles are flaky on reboot. Several firmware upgrades ago the time delay turn on and off was increased to over shadow the flakiness. By grounding pin 9 and applying power to main ...

CDM installs in ambulances need to have radio main power connected to key operated relay output supplied by the conversion company or make one yourself. Jump pins #7 & 9 on accessory connector on the back of the chassis. No need for ignition sense kit or connection. to #10. Have 30+ EMS units & 60 ...

Hello, I am also interested in the name of the upgrade of a 5AN to the features of a 6AN. I was wondering if the info was going to be posted? Thanks, Peter