Hello...

I have two unrelated questions regarding receive audio on HT1250's (these questions are applicable to our inventory of 20-something HT1250's):

1) On the channels which have MDC Receive signalling, when another transmitting radio is keyed up, the MDC data burst is sent and is heard on my ...

Hello...

My fire department uses a Motorola People Finder LT for two-tone encoding. We have a list of the 2-digit numbers to enter to page our department, but we would like to add additional tone frequencies for different paging purposes (officers, engineers, etc.) but don't know how to determine ...

that I am not sure of...how would I go about finding that?

ok I troubleshot that problem, but my new problem is with the Vega console itself. It was programmed to change the DeskTrac from channels 1 to 4, but I added 7 more channels to the MaxTrac. I was able to program the Vega remote to climb to channel 11, but it still only operates the DeskTrac between ...

Hello...

My fire department utilizes a Motorola Desktrac as its main radio, and a Telex Vega C-2000 is used as a tone remote for transmitting and receiving in the station. I am interested in utilizing the base radio for scanning, but I am unsure if that will cause an issue with the remote. In ...

I pretty much want to know if there's any type of ltierature on the unit--specifically if there are any alert tone options, or options to sound multiple sets of pager tones without typing one, pressing enter, and waiting to enter another.

Hello.

My fire department utilizes the Motorola People Finder LT for tone encoding. I wasn't sure if anyone is familiar with it or knows where any type of information or user's manual can be acquired, because I haven't had any luck thus far. I had never heard of one before-it's gray with an LCD ...

Yes! thank you Wavetar, that did the trick!

ok apparently I'm not getting my point across...not to sound rude, thank you for your concern, but I am fully aware of not using a portable in place of a pager, and I don't do so...I simply want to know if the HT1250 can continue scan after the alert is received.

The channel is my main fire channel, I want to be able to scan but monitor for a QCII alert--I have that much accomplished, I just want the radio to resume scanning afterwards...like I said it's not unheard of, as I have accomplished it on my HT1000 using the "auto reset" feature...but it doesn't ...

Hello...

I currently have my HT1250 programmed for QCII with "OR" signalling, but if I have the radio in scan and I receive an alert, the radio stops scanning and "Call received" remains on the display with the amber LED flashing until the PTT or Monitor buttons are pressed. Is there any way for ...

Hello...

I am looking to hook a bell up to a Minitor II or a Minitor IV to ring for a set amount of time (5 seconds maybe) whenever the pager receives a call. I have an amplified charger for both the II and IV, and programming capabilities. How exactly would such be done (as easily and inexpensive ...

RKG: what exactly do you mean when you say check the "CSQ sqelch"...is that the tight/normal setting?

Hello...

My fire department recently purchased a batch of HT1250 radios and the CPS software. The radios were programmed with the priority channel dictated by the channel knob selector, with a priority sample rate of 750ms. When the radio is placed in scan mode, it scans correctly until a signal is ...