Currently installing a Kenwood TK8150 radio with a UHF Pyramid 250 repeater attach to the radio. This setup is going into a Dodge Sprinter ambulance. The repeater needs to be on when the crews are out of the truck and installing a toggle switch so the crews can flip on is out of the question ...

Is there any software out there that can be install on a computer, that can decode MDC1200 Signaling.

You are correct, I have that option installed were everything is installed on a master switch and it controls relays were everything is connected into. The problem I am running into is some of these vehicles (ambulances) get use for 16hrs. a day and they get parked at night and the crews don't turn ...

I am looking for some type of device like a surge protector, were 2-way radios, siren box and other computer equipment is wired into and it would protect it when a vehicle is jumped. Thanks Richard

I have a 2006 E-350 Truck and I’m looking to tap in a wire lead, so when the truck gets shifted into park a neg ground is set off to trigger a relay. Does anyone know were I can locate that wire or circuit at on that style of truck. Thanks, Richard

I would like to try to connect a UHF Mot. CDM 1550LS (UHF) to a Vertex VX4000(VHF), so when CDM 1550LS is set on a certain ch. and the user is out on portable near the vehicle and is on the same ch. that traffic from the portable is going through the uhf radio and then being rebroadcasted over the ...

I would like to try to connect a UHF Mot. CDM 1550LS (UHF) to a Vertex VX4000, so when CDM 1550LS is set on a certain ch. and the user is out on portable near the vehicle and is on the same ch. that traffic from the portable is going through the uhf radio and then being rebroadcasted over the Vertex ...

The sound does change when the truck is given gas to go. It goes up to a high pitch sound...

I just recently installed a brand new vhf radio system in a 2006 Crestline Ambulance and the whining noise when the truck is idle or moving is so bad you can not hear anyone talk, once you turn the truck off it stops. I have placed a filter in and does not seem to correct the problem, any else that ...

Looking for some information on vehicular repeaters. I know that vertex and pyramid communications makes in-vehicular repeaters. I was wondering if any one has either units in service and which is the better of the two units. Any information would be appreciated. Thanks Richard

Thanks for everyones respones... I have been using the remote entry key chain, to lock the vehicle while it is running...

I just done with an installation of emergency equipment and radios in a 2005 Ford Explorer and we just noticed a ford safety feature. When the vehicle is running and driver exists the vehicle and locks the door, the doors do not lock. Has anyone else ran across this problem, if so how do you disable ...