If you have front cover off, on the bottom are two more screws centered. screw these out and radio guts slide out the top, disconnect speaker first. take back chrome plate off and solders are at top.

600e uses the MT1000 software, unless if is low band, see batlabs web page on model specific, and it will explain.

If it the slant face model, it has a jumper you ground and can program from front if newer model. If it a older model it takes a E-Prom programmer. I did a search on yahoo and there are some people around who can still program them. Nice radio cause you can hang it from the roof and invert the ...

I figured out what I had done wrong, thanks for all the help.

Got the zones in and scan setup but it won't let me set priority channel. on gives option from face of n-priority. What am i missing.

Ok, have figure out the zones, programming them in now. The transmit problem might be my power supply, it works ok to transmit with my MCX1000 (great radio), but Spectra reboots when I transmit.

Just got a spectra A5 head, dashmount. Have channels programmed up, and want to enable zones, have MLM V6.15. Tried enabling zones and when I try to program says not enable. Also found the area to name zones and it keeps saying invalid entry when i try to name a zone 01, or 02 etc.

Have it ...

Has anyone tried going in with a HEX editor and change the saved file to make it use PL like Non-priority PL does, but with Priority. You would think you could change your saved file somehow?

That's what I had to do before was take scan squelch up to 14 to keep the trash out, but this does cut down on sensitivity when in scan. It must be as they say in scan the priority channel is CSQ, not PL. Guess that why my in car video system set it off on traffic stops and its 2.4 GHz.

Thanks for ...

Tried like this and the trash comes thru, can you look in the radio adjustment and tell me what your squelch settings are set at. 3 adjustments.

Thanks

Tried it and am listening it scans ok, no trash, but when it is receiving another channel and traffic is on priority it doesn't goto the priority channel. Get trash in Priority PL, but not in Non Priority PL.

Am I missing something or I might to have to live with it.

Where is the setting to set it to follow the channel knob, remember seeing it but damn if I can find it now.

Am using R03.01 to program it, does new versions like 3.02 help, maybe updated software corrected some of the problem. What is kicking it off isn't other radios in the are, its floursent lights at convience stores and even my laser printer.

Might try programming with newer RSS if I had a copy.

Have a 16 channel MT-1000, trying to scan 7 channels that have tone
codes set. Have tried priority PL Scan, and priority scan, as well as
non priority PL scan and set channel two as fixed priority but am still
getting trash coming in on radio when in scan. This happens at lots of
locations, the only ...

Have a mcx-1000 changing from under dash to remote head, have bought a nice remote head system, but transmits when hanging up, grounding mic. The heads came off a 800 or 900 radio, by having grp and sys keys on front of display. I have VHF radio. If you hang it up several times it will return to ...