While recasing my XTS 3k the display stuck to the case and I broke the flex. The display is still good, can I replace the flex (if so what is part number?) or do I need to purchase a new display and flex ( part number?kit number?). Thanks all in advance

You can not purchase the flex by itself ...

While recasing my XTS 3k the display stuck to the case and I broke the flex. The display is still good, can I replace the flex (if so what is part number?) or do I need to purchase a new display and flex ( part number?kit number?). Thanks all in advance

Followed proceedure on this site, ascii/hex edit the codeplug file and changed freq., saved file, loaded into radio using 3.0.1 MT1000 RSS without viewing file. When radio read back it shows 6m freq's but no beep on pwr on, no squelch etc.

I have a 42-50 mt 1000 on 42mhz. I did the file mod and loaded 6 meter freq. into it and it comes up dead, no audio, nothing. Reload original file and it works fine. Any ideas?

At work

On the battle ground:

Monadnock Expandable Baton
MK-9 OCP (Oil Based) Projector
2 pairs of Peerless Handcuffs and Key
A crap load of Folger Adams Keys
Motorola MTS 2000 800 Mhz type 1 trunked
Scion rechargeble flashlight
Big pouch of latex gloves
CPR Mask
My wits and brains

In the state ...

I have a T3011BX that I have upgraded with a Motorola factory AX/BX to DX chip. I replaced U103 with the new software chip and u104 with a 24C16 EEPROM as listed in the upgrade instructions. Now I am getting a U104 error and the unit locks up. any ideas what is happening? I have replaced the 24C16 ...

Could it be made to work on the various current non astro heads?

If so, what configuration?

http://i23.ebayimg.com/01/i/07/75/69/74_1.JPG

I used ram pod mounts for my Isuzu Trooper SUV, have control heads for the Yaesu dual band and HF mobile on pod mount and clamp/pod for my phone. They worked well and are easy to install. JMHO, cheers

I purchased some astro/r's from Audiowrks as well, just picked up some cheap as 1 cases on ebay and changed out the r's. They are much more useful this way.