Mcs2000: 9600 baud packet wiring

The General forum is where users can discuss any topic regarding Motorola communications equipment - hardware, software, etc. There are also several focused forums on this board, so please take the time to ensure that your questions doesn't fall into one of those categories before posting here!

Moderator: Queue Moderator

Post Reply
atod
New User
Posts: 4
Joined: Sat May 20, 2017 9:41 pm

Mcs2000: 9600 baud packet wiring

Post by atod »

Hi Folks,

Is anyone aware if this model can be wired up for 9600 baud packet? I know it's not used widely and am interested if anyone has wired it up.

Thanks again
motorola_otaku
Posts: 1854
Joined: Tue Jan 13, 2004 7:03 am

Re: Mcs2000: 9600 baud packet wiring

Post by motorola_otaku »

You will need to enable VRM100 operation to get discriminator audio in/out. The MMDVM Yahoo group has complete instructions in the Files section: https://groups.yahoo.com/neo/groups/mmdvm/info

edit: The VRM650 and the MCS2000 are identical, so follow the instructions for a VRM650.
Post Reply

Return to “General Motorola Solutions & Legacy Radio Discussion”