Users may not create topics, posts, or private messages containing or relating to the following material (especially pertaining to Motorola copyrighted software, unless you want Motorola to come along and shut this site down):

  • Listing for sale or trade of, or links to sites offering for sale or trade of, or giving away, Radio
    Service Software (RSS) or Customer Programming Software (CPS)
  • Profanity, pornography, defamation, or slanderous remarks directed towards any individual or entity
  • Commercial advertising (except in the Batboard Vendors forum, as approved by the Admin/Mod Staff)
  • Any other items which may be deemed as offensive

If any topics, posts, or private messages containing or relating to the aforementioned material are brought to the attention of the Admin/Mod Staff, they will be deleted.

Additional FAQ items appear here in Forum Rules. Please review them for posting guidelines and further clarification.

Needed: 45.0 Micor Channel elements for base

The General forum is where users can discuss any topic regarding Motorola communications equipment - hardware, software, etc. There are also several focused forums on this board, so please take the time to ensure that your questions doesn't fall into one of those categories before posting here!

Moderator: Queue Moderator

George
Posts: 257
Joined: Wed Apr 16, 2003 11:14 am
What radios do you own?: X9000, HT1550XLS, MTS2000, etc

Needed: 45.0 Micor Channel elements for base

Postby George » Thu Jun 22, 2017 7:14 am

Looking for 45.0 channel elements for a Micor base. Both Transmit and Receive

Anyone have any in the drawer they wish to sell?

fineshot1
Posts: 908
Joined: Wed Oct 12, 2005 5:13 am

Re: Needed: 45.0 Micor Channel elements for base

Postby fineshot1 » Thu Jun 22, 2017 11:06 am

I am assuming you need KXN1024 RX and KXN1028 TX Elements.
If you can confirm later when i get home i will look in my box
and see if I have them and get back to you via pm.
fineshot1
NJ USA

KitN1MCC
Posts: 1872
Joined: Wed Jan 16, 2002 4:00 pm
What radios do you own?: ht1550 XLS,6 MT-1000,

Re: Needed: 45.0 Micor Channel elements for base

Postby KitN1MCC » Thu Jun 22, 2017 4:05 pm

nice to see an old micor still in service

George
Posts: 257
Joined: Wed Apr 16, 2003 11:14 am
What radios do you own?: X9000, HT1550XLS, MTS2000, etc

Re: Needed: 45.0 Micor Channel elements for base

Postby George » Fri Jun 23, 2017 5:37 am

I think it's kxn1028 and K1003, or is it K1004? KXN1028 for TX and K1003/4 for RX. I forget which.
Yes, I have a customer that needs to recrystal a base and has a need for new deployment.
When was the last time you saw a low band 1/4 wave on a body mount on a vehicle?

fineshot1
Posts: 908
Joined: Wed Oct 12, 2005 5:13 am

Re: Needed: 45.0 Micor Channel elements for base

Postby fineshot1 » Fri Jun 23, 2017 2:14 pm

George wrote:Looking for 45.0 channel elements for a Micor base. Both Transmit and Receive

Anyone have any in the drawer they wish to sell?


Sorry George, i no gots - everything i have is VHF-Hi band.
fineshot1
NJ USA

User avatar
d119
Posts: 3433
Joined: Tue Mar 19, 2002 4:00 pm

Re: Needed: 45.0 Micor Channel elements for base

Postby d119 » Fri Jun 23, 2017 7:41 pm

There's no band like low band.

KitN1MCC
Posts: 1872
Joined: Wed Jan 16, 2002 4:00 pm
What radios do you own?: ht1550 XLS,6 MT-1000,

Re: Needed: 45.0 Micor Channel elements for base

Postby KitN1MCC » Sun Jun 25, 2017 4:06 pm

George

Mass state police still has them. I have 2 on my truck. i found the brand new 1/4 to be junk i scavage for old ones

impalass427
Posts: 27
Joined: Mon Feb 09, 2009 10:42 am

Re: Needed: 45.0 Micor Channel elements for base

Postby impalass427 » Mon Jun 26, 2017 11:30 am

I have about 200 micor elements, closest I have was a receive on 45.1000 but I will check wednesday at the shop.
BTW, i still use a 100w micor on low band, been licensed there for over 35 years. Don S

George
Posts: 257
Joined: Wed Apr 16, 2003 11:14 am
What radios do you own?: X9000, HT1550XLS, MTS2000, etc

Re: Needed: 45.0 Micor Channel elements for base

Postby George » Mon Jun 26, 2017 12:57 pm

Thank you for looking. I'll await your response.


Return to “General Motorola Solutions & Legacy Radio Discussion”

Who is online

Users browsing this forum: Bing [Bot] and 3 guests