CDM 1550 audio problem

The General forum is where users can discuss any topic regarding Motorola communications equipment - hardware, software, etc. There are also several focused forums on this board, so please take the time to ensure that your questions doesn't fall into one of those categories before posting here!

Moderator: Queue Moderator

Post Reply
radiocat37
Posts: 210
Joined: Mon Sep 22, 2003 9:59 am

CDM 1550 audio problem

Post by radiocat37 »

I have a CDM-1550 (Non-LS) VHF. I am not sure if I have a true problem or a programming not correct problem. I am not getting any audio from either the front speaker (It is plugged in) or the rear speaker when attached with the acc. plug. I can change the setting in the CPS to handset and receive audio is fine through the front plug, using a handset. I have no history on the radio. It meets all other specs (TX and RX). Is there a speaker plug somewhere on the main board?

Thanks for any help
Last edited by radiocat37 on Tue Jul 18, 2017 1:29 pm, edited 1 time in total.
Brian Griffin: Ah, if my memory serves me, this is the physics department.
Chris Griffin: That would explain all the gravity.
.

Lois: Peter, you're drunk again.
Peter: No, I'm just exhausted because I've been up all night drinking.
motorola_otaku
Posts: 1854
Joined: Tue Jan 13, 2004 7:03 am

Re: CDM 1550 audio problem

Post by motorola_otaku »

My first guess would be that the speaker amp is blown. AFAIK there's no programming setting or jumper on the board that would disable speaker audio like you're describing.
Post Reply

Return to “General Motorola Solutions & Legacy Radio Discussion”