New XPR7550e - 8% better range - is this true?

The General forum is where users can discuss any topic regarding Motorola communications equipment - hardware, software, etc. There are also several focused forums on this board, so please take the time to ensure that your questions doesn't fall into one of those categories before posting here!

Moderator: Queue Moderator

Post Reply
g8tzl2004
Posts: 1128
Joined: Wed Sep 08, 2004 10:13 am

New XPR7550e - 8% better range - is this true?

Post by g8tzl2004 »

I read that the "new" XPR7550e (note the "e") vs the original XPR7550 had a quoted 8% better range compared to the original XPR7550.

The official spec says the XPR7550e has an RX sensitivity of 0.16uV (analog) for 12dB SINAD and 0.14uV (digital).

The original XPR7550 had quoted "typical" specs of 0.22uV for 12dB SINAD.

BUT the original XPR7550 has an exceptionally sensitive front end...much better than 0.22uV and probably around 0.14uV.

So has the RX sensitivity of the XPR7550e actually improved or has Motorola just (for once) provided a true measure of the actual sensitivity rather than using the useless default specs of 0.22uV for 12dB SINAD which it uses on lots of radios?? So in reality is there actually NO RX sensitivity difference between an XPR7550e and an XPR7550?
User avatar
Bill_G
Posts: 3087
Joined: Thu Sep 17, 2009 5:00 am

Re: New XPR7550e - 8% better range - is this true?

Post by Bill_G »

I think it reflects greater confidence in their stated guaranteed performance rather than an actual change in performance. That is, the 7550's have hot front ends, but had an understated receiver spec that they could guarantee. But now, after years of excellent production runs, they are confident they can guarantee these better numbers. So, nothing has changed except their confidence.
N4KVE
Posts: 1647
Joined: Wed Apr 02, 2003 10:35 am
What radios do you own?: APX XTS XTL TRBO 900MHZ

Re: New XPR7550e - 8% better range - is this true?

Post by N4KVE »

I never read that. But I did read that the "e" has better battery life. GARY
g8tzl2004
Posts: 1128
Joined: Wed Sep 08, 2004 10:13 am

Re: New XPR7550e - 8% better range - is this true?

Post by g8tzl2004 »

The 8% improved range claim is in official Motorola specs "....an improved receiver boosts range by up to 8%".

Its interesting that Motorola has actually published accurate sensitivity specs...it will be interesting to see if all the new dual band P25 stuff has similar official accurate Rx sensitivity measurements.

I would also be interested to establish how Motorola actually worked out that the increased coverage was "up to 8%"...is there a formula or did they carry out trials?

I still don't know why the "sister" XPR5550 mobile does not have a similar hot receiver. I also recently checked out a Vertex VXD7200 (XPR4550 clone) and that had the same sensitivity as the XPR5550.
User avatar
Bill_G
Posts: 3087
Joined: Thu Sep 17, 2009 5:00 am

Re: New XPR7550e - 8% better range - is this true?

Post by Bill_G »

There is no direct correlation between rcvr sensitivity and range. It is merely one of many things to consider. And quite often, sensitivity comes at the cost of rejection.

My RL experience with a UHF 7550 is it performs better than previous HT models in a number of situations. It truly does have some good ears, and doesn't turn to garbage at a high site with thousands of watts floating in the air.
User avatar
escomm
Queue Moderator
Posts: 5170
Joined: Fri Mar 24, 2006 8:24 pm

Re: New XPR7550e - 8% better range - is this true?

Post by escomm »

I have a customer with a spot that is very fringy... legacy and E models both key into the repeater but do not pass any audio... I would like to see some proof of these claims... range is a two way street...
User avatar
Bill_G
Posts: 3087
Joined: Thu Sep 17, 2009 5:00 am

Re: New XPR7550e - 8% better range - is this true?

Post by Bill_G »

Yep. There's uplink and downlink range, and differences of antenna elevations, antenna patterns, site noise, clutter density, et al to consider.

But, sales people love incremental improvements.
g8tzl2004
Posts: 1128
Joined: Wed Sep 08, 2004 10:13 am

Re: New XPR7550e - 8% better range - is this true?

Post by g8tzl2004 »

The default squelch on the DMR repeater might be too high...and there is probably nothing you can do to lower it?

The lowest analog SQ setting on my XPR5550 is also too high...there are only 2 SQ levels rather than being fully adjustable (such as with an MCS2000)....and its maybe the same in DMR mode.

The green LED lights up on a weak copyable analog signal but the SQ does not open...but if you manually open the SQ you can hear the signal OK. But you need an extra 2dB of signal for the SQ to automatically open. Motorola need to change the firmware so that you can lower the SQ to whatever level you want rather than just having 2 levels...especially as the green LED lights up so you know the radio is receiving a signal but the SQ is not opening.
User avatar
Bill_G
Posts: 3087
Joined: Thu Sep 17, 2009 5:00 am

Re: New XPR7550e - 8% better range - is this true?

Post by Bill_G »

Ah yes - It's the AND/OR SQ debate again this time in digital. Which is better.

Threashold squelch and usable signal are two different things. The radio may be able to decode the envelope enough to trigger a detect, but not well enough to open the audio gate. 2db may be all it takes, but it is your visual indicator of your existing signal conditions. Use it as a tool.
g8tzl2004
Posts: 1128
Joined: Wed Sep 08, 2004 10:13 am

Re: New XPR7550e - 8% better range - is this true?

Post by g8tzl2004 »

When the green RX LED lights up, I want the SQ to open!!!!

Once the green LED lights up, the signal is readable BUT the radio then requires an extra 2dB of signal to open the SQ.

What's the point of having the green LED light up if the SQ will not open?

Why only have 2 SQ levels....why not have a variable SQ level so I can set the SQ at whatever threshold I want....like with every previous Motorola analog and P25 radio?

Who at Motorola decided that 2 SQ levels was good enough?

Also my UHF XPR7550 SQ does open on a just readable signal...but not my XPR5550 and XPR3500...go figure. Have later firmware updates increased the SQ threshold as commercial users complained that the radio opens on too weak signals :)?
User avatar
Bill_G
Posts: 3087
Joined: Thu Sep 17, 2009 5:00 am

Re: New XPR7550e - 8% better range - is this true?

Post by Bill_G »

Do you need a kleenex with aloe, or will any tissue do? :)
g8tzl2004
Posts: 1128
Joined: Wed Sep 08, 2004 10:13 am

Re: New XPR7550e - 8% better range - is this true?

Post by g8tzl2004 »

Aloe will be nice...thank you :)
g8tzl2004
Posts: 1128
Joined: Wed Sep 08, 2004 10:13 am

Re: New XPR7550e - 8% better range - is this true?

Post by g8tzl2004 »

I need to do some experimenting...but can you not use Service Mode (or whatever) to lower the SQ threshold level - presumably the level of the 2 default SQ settings (normal/tight) must be set somehow?
Post Reply

Return to “General Motorola Solutions & Legacy Radio Discussion”