Users may not create topics, posts, or private messages containing or relating to the following material (especially pertaining to Motorola copyrighted software, unless you want Motorola to come along and shut this site down):

  • Listing for sale or trade of, or links to sites offering for sale or trade of, or giving away, Radio
    Service Software (RSS) or Customer Programming Software (CPS)
  • Profanity, pornography, defamation, or slanderous remarks directed towards any individual or entity
  • Commercial advertising (except in the Batboard Vendors forum, as approved by the Admin/Mod Staff)
  • Any other items which may be deemed as offensive

If any topics, posts, or private messages containing or relating to the aforementioned material are brought to the attention of the Admin/Mod Staff, they will be deleted.

Additional FAQ items appear here in Forum Rules. Please review them for posting guidelines and further clarification.

Head protocol

The General forum is where users can discuss any topic regarding Motorola communications equipment - hardware, software, etc. There are also several focused forums on this board, so please take the time to ensure that your questions doesn't fall into one of those categories before posting here!

Moderator: Queue Moderator

Farren
New User
Posts: 1
Joined: Sat Sep 23, 2017 5:55 pm

Head protocol

Postby Farren » Wed Nov 22, 2017 9:33 pm

Is there any documentation available for the pinout and protocol used for the head connector on a CDM 1550 (or 1250 or 750) radio?

I have a couple dead radios and I had the bright idea of gutting them and putting in a Raspberry Pi or Beaglebone Black computer to create a rugged mobile computer. I thought it would be fun to use the existing display/buttons/knob/speaker/mic as input/output from the computer board. I did some searching but found nothing so either I'm using the wrong terms or the info isn't available... There doesn't seem to be enough connectors in that ribbon cable for everything to have it's own line, so I'm guessing there's some multiplexing and serial I/O going on. But, reverse engineering it is beyond my time & talent.

For example, a Raspberry Pi computer and one of the many RTL/SDR dongles connected to the existing antenna jack could create a nifty scanner in an old CDM body...

Thanks!

-Farren

Return to “General Motorola Solutions & Legacy Radio Discussion”

Who is online

Users browsing this forum: Baidu [Spider], Bing [Bot] and 7 guests