Impres multi unit charger conversion question

The General forum is where users can discuss any topic regarding Motorola communications equipment - hardware, software, etc. There are also several focused forums on this board, so please take the time to ensure that your questions doesn't fall into one of those categories before posting here!

Moderator: Queue Moderator

Post Reply
User avatar
motor59
Batboard $upporter
Posts: 422
Joined: Mon Oct 01, 2001 4:00 pm

Impres multi unit charger conversion question

Post by motor59 »

Hi Guys- been a while.

We're in the process of converting from legacy Waris, Jedi and XTS-series portables to APX4000 units.
On my sole compatible Jedi charger, I bought the NNTN8170A adapters, and they work great. Kinda pricey at about $30 each for a chunk of plastic, but...

However, I have a number of Waris Impres chargers that I'd like to convert to APX as well. My thought was to disassemble a WPLN4211B charger from some XPR6550 radios we have kicking around, and get the charging pocket assembly P/N. The XPR charger seems to work fine with the APX4000's.
And we all know that these things are pretty much the same inside.

So, taking it apart got me a number. That number doesn't really seem to lead me anywhere, but I gave it to Parts ID, and they came up with a 'substitute' that was supposed to work. (0189207F02). Ordered one and got it today.

Unfortunately, this gets me a MUC pocket that will allow me to charge the Jedi series radios. Not the APX. I'd still need to buy the individual adapters to make it work, and now we're approaching $350 for this 'cheap' workaround.

Parts ID tells me the APX charging pocket is NA. So is the XPR charging pocket.

Any 'secret' info out there in the hive mind that can point me in a proper direction?

Thanks!
-motor
"We sleep safe in our beds because rough men stand ready in the night to visit violence on those who would do us harm. "
User avatar
Astro Spectra
Posts: 668
Joined: Sat Sep 22, 2001 4:00 pm

Re: Impres multi unit charger conversion question

Post by Astro Spectra »

As a field expedient I've used folded cardboard and a handkerchief. While the MUC is handy it's, as you say, too expensive for conversion of more than a pocket or two.

As for a wholesale remplacement the only option I could suggest is 3D printed MUC work alike from a maker bot specialist.
Post Reply

Return to “General Motorola Solutions & Legacy Radio Discussion”