Page 1 of 1

Motorola HT1250 - 3.5mm RX Only Earbuds

Posted: Mon Feb 26, 2018 8:32 am
by grump
Hello all,
I’ve tried doing searching on this and can’t quite seem to figure this out if this is possible. I’ve seen some various adapters around but I’m not totally sure. So here goes...

This is for a Motorola HT1250 without a speaker mic. I know with a speaker mic this would be easy but it is not a feasible option.

1. Most of the time use conventional 3.5mm consumer earbuds for RX only, no TX is required.
2. If required, unplug earbuds and use radio as a regular HT.

Thanks in advance.

Re: Motorola HT1250 - 3.5mm RX Only Earbuds

Posted: Mon Mar 05, 2018 8:51 am
by escomm
AAHLN9717A with BDN6719A would probably work