CDM 1250 Accessory Pinout ??

The General forum is where users can discuss any topic regarding Motorola communications equipment - hardware, software, etc. There are also several focused forums on this board, so please take the time to ensure that your questions doesn't fall into one of those categories before posting here!

Moderator: Queue Moderator

Post Reply
User avatar
FFParamedic571
Banned
Posts: 467
Joined: Tue Aug 27, 2002 7:57 pm

CDM 1250 Accessory Pinout ??

Post by FFParamedic571 »

OK.. Im drawing a blank and I can't find my notes.. I know the ignition sense is pin #10...

What is the external speaker?? 1 and 16...
AWT
Posts: 53
Joined: Fri Apr 25, 2003 12:48 pm

Post by AWT »

1- Speaker-
2- Ext. Mic
5- Flat TX Audio
7- GND
10- Ignition
11- RX Audio
13- Switched B+
16- Speaker+
User avatar
nmfire10
Batboard $upporter
Posts: 4109
Joined: Sat Jun 29, 2002 4:41 pm

Post by nmfire10 »

I need to hook it up on mine too. Which way to those numbers go? Across?
"I'll eat you like a plate of bacon and eggs in the morning. "
- Some loser on rr.com

eBay at it's finest:
Me: "What exactly is a 900Mhz UHF CB?"
Them: "A very nice CB at 900Mhz speed!"

:-?
User avatar
FFParamedic571
Banned
Posts: 467
Joined: Tue Aug 27, 2002 7:57 pm

Post by FFParamedic571 »

Got it. Thanks AWT
AWT
Posts: 53
Joined: Fri Apr 25, 2003 12:48 pm

Post by AWT »

nmfire10, don't ask me why the big M did it this way but here it is.
REAR VIEW
<<<<<PCB SIDE>>>>>>>>
20- 2- 4- 6- 8-10-12-14-16-18
19- 1- 3- 5- 7- 9- 11-13-15-17

Hope that helps
User avatar
HumHead
Moderator
Posts: 1769
Joined: Tue Sep 25, 2001 4:00 pm

Post by HumHead »

Motorola numbered the connector like that to keep the central 16 pins the same as the rest of their 16 pin accessory plugs. The added outer pins on the CDMs are used for flashing firmware, etc.

For standard accessory connections, you can use a regular 16 pin connector, and just ignore pins 17-20 (just be careful about bending them when inserting the plug :o )

The pinouts and diagrams are all available on the main Batlabs site, although I seem to be unable to reach it at the moment.
Post Reply

Return to “General Motorola Solutions & Legacy Radio Discussion”