Users may not create topics, posts, or private messages containing or relating to the following material (especially pertaining to Motorola copyrighted software, unless you want Motorola to come along and shut this site down):

  • Listing for sale or trade of, or links to sites offering for sale or trade of, or giving away, Radio
    Service Software (RSS) or Customer Programming Software (CPS)
  • Profanity, pornography, defamation, or slanderous remarks directed towards any individual or entity
  • Commercial advertising (except in the Batboard Vendors forum, as approved by the Admin/Mod Staff)
  • Any other items which may be deemed as offensive

If any topics, posts, or private messages containing or relating to the aforementioned material are brought to the attention of the Admin/Mod Staff, they will be deleted.

Additional FAQ items appear here in Forum Rules. Please review them for posting guidelines and further clarification.

Motorola Mic Pinout

The General forum is where users can discuss any topic regarding Motorola communications equipment - hardware, software, etc. There are also several focused forums on this board, so please take the time to ensure that your questions doesn't fall into one of those categories before posting here!

Moderator: Queue Moderator

Probie715
Posts: 4
Joined: Mon Aug 11, 2003 7:35 am
Location: Mountville, PA
Contact:

Motorola Mic Pinout

Postby Probie715 » Mon Sep 08, 2003 10:10 am

This is a relatively simple question...I'm looking for the pinout and description for the RJ45 connector for a Motorola Palm Mic. Any help is greatly appreciated.
Brian D. Saylor
Captain / EMT / Webmaster / IT Admin
Mountville Fire Company No. 1

User avatar
HumHead
Moderator
Posts: 1759
Joined: Tue Sep 25, 2001 4:00 pm
Location: Eleven. Exactly. One louder.
Contact:

Postby HumHead » Mon Sep 08, 2003 12:29 pm

That depends a bit on which radio it is for. You can find a wealth of information, usually including mic and accesory pinouts, on the model specific pages at http://batlabs.com

Probie715
Posts: 4
Joined: Mon Aug 11, 2003 7:35 am
Location: Mountville, PA
Contact:

Motorola Mic Pinout

Postby Probie715 » Wed Sep 10, 2003 10:25 am

My whole intention is to rewire a second remote mic jack on a TK-6110 to be used with a Motorola Mic. I am using a Motorola HMN1056C Mic. the pinout is confusing from looking at the schematic for the mic jack on a GM300. I only need 4 wires (Hook, Ground, Mic Audio and PTT) they are only using pins 3,4,5 and 6 on the mic connector, but I am having difficult IDing which pins are which function.
Brian D. Saylor

Captain / EMT / Webmaster / IT Admin

Mountville Fire Company No. 1


Return to “General Motorola Solutions & Legacy Radio Discussion”

Who is online

Users browsing this forum: Baidu [Spider], Yahoo [Bot] and 4 guests