Motorola CP200 PA

The General forum is where users can discuss any topic regarding Motorola communications equipment - hardware, software, etc. There are also several focused forums on this board, so please take the time to ensure that your questions doesn't fall into one of those categories before posting here!

Moderator: Queue Moderator

Post Reply
JD
Posts: 356
Joined: Tue Oct 16, 2001 4:00 pm

Motorola CP200 PA

Post by JD »

Have a CP200 UHF, 4 watts , with only .04 watts output. Hate to pay $193.00 flat rate repair.

Anyone run across this problem ?

Thanks.
Rayjk110
Banned
Posts: 1183
Joined: Thu Jan 06, 2005 4:10 pm

Re: Motorola CP200 PA

Post by Rayjk110 »

Yeah, send it in.

Every time I get one on the bench at work with a shot PA it gets boxed and sent to New Mexico...
User avatar
Bat2way
Posts: 183
Joined: Tue Sep 04, 2001 4:00 pm

Re: Motorola CP200 PA

Post by Bat2way »

For those of us who actually have to repair repair radios..........

I've used junked units for parts. Replaced a bad PA from one with no problem.
The PA's Mitsubichi part # is RAO7M4452MS
Post Reply

Return to “General Motorola Solutions & Legacy Radio Discussion”