Users may not create topics, posts, or private messages containing or relating to the following material (especially pertaining to Motorola copyrighted software, unless you want Motorola to come along and shut this site down):

  • Listing for sale or trade of, or links to sites offering for sale or trade of, or giving away, Radio
    Service Software (RSS) or Customer Programming Software (CPS)
  • Profanity, pornography, defamation, or slanderous remarks directed towards any individual or entity
  • Commercial advertising (except in the Batboard Vendors forum, as approved by the Admin/Mod Staff)
  • Any other items which may be deemed as offensive

If any topics, posts, or private messages containing or relating to the aforementioned material are brought to the attention of the Admin/Mod Staff, they will be deleted.

Additional FAQ items appear here in Forum Rules. Please review them for posting guidelines and further clarification.

Possible to operate a gr1225 without control head?

The General forum is where users can discuss any topic regarding Motorola communications equipment - hardware, software, etc. There are also several focused forums on this board, so please take the time to ensure that your questions doesn't fall into one of those categories before posting here!

Moderator: Queue Moderator

User avatar
witthoft
Posts: 99
Joined: Sun Dec 31, 2006 3:08 pm
What radios do you own?: 4 Kenwood TK-880's

Possible to operate a gr1225 without control head?

Postby witthoft » Wed Feb 16, 2011 5:24 pm

I was wondering if after I program the radio with the control head if it were possible to use just the r1225 as a repeater, or does it need the control head? If so, how would it be done? Are there any drawbacks to this, other than not having a local mike? Would you lose the "repeat enabled", or the "mic on hook" functions? Thanks for your help.
Tools on board-- Duct tape and Baling wire

Will
Posts: 6823
Joined: Tue Sep 04, 2001 4:00 pm

Re: Possible to operate a gr1225 without control head?

Postby Will » Wed Feb 16, 2011 6:09 pm

witthoft wrote:I was wondering if after I program the radio with the control head if it were possible to use just the r1225 as a repeater, or does it need the control head? If so, how would it be done? Are there any drawbacks to this, other than not having a local mike? Would you lose the "repeat enabled", or the "mic on hook" functions? Thanks for your help.


Yes, the GR1225 and other variants do not need the control head to operate as a repeater. You do have to add a jumper to the control connector on the RF unit to switch the A+ on.

No drawbacks, we run all of the ones we service without the control heads. One advantage is no one can fool with the knobs...

We have a test cable that plugs into the front of the RF chassis and gives the capability to program, use a test mic (GM300 mob mic), and listen to the speaker.

User avatar
witthoft
Posts: 99
Joined: Sun Dec 31, 2006 3:08 pm
What radios do you own?: 4 Kenwood TK-880's

Re: Possible to operate a gr1225 without control head?

Postby witthoft » Wed Feb 16, 2011 7:05 pm

Will-- could you tell me exactly the pins to jump to set this up? Is it where the ribbon cables connect to the front of the radio? Thanks for your help.
Tools on board-- Duct tape and Baling wire

Will
Posts: 6823
Joined: Tue Sep 04, 2001 4:00 pm

Re: Possible to operate a gr1225 without control head?

Postby Will » Wed Feb 16, 2011 7:46 pm

witthoft wrote:Will-- could you tell me exactly the pins to jump to set this up? Is it where the ribbon cables connect to the front of the radio? Thanks for your help.



J 8 is a 15 pin connector, male pins on the front of the RF unit. Pin one is closest to the Receiver antenna connector, pin 3 is blank. Pin 8 is A+, pin 7 switched A+, short these two pins with a Berge jumper. ( Like the two pin jumpers on the computer motherboards).

Close the door....

User avatar
witthoft
Posts: 99
Joined: Sun Dec 31, 2006 3:08 pm
What radios do you own?: 4 Kenwood TK-880's

Re: Possible to operate a gr1225 without control head?

Postby witthoft » Wed Feb 16, 2011 8:12 pm

Great. Thanks for the help!
Tools on board-- Duct tape and Baling wire

User avatar
Bill_G
Posts: 3071
Joined: Thu Sep 17, 2009 5:00 am

Re: Possible to operate a gr1225 without control head?

Postby Bill_G » Thu Feb 17, 2011 5:19 am

Good info Will. Thanks!

n8vjp
New User
Posts: 4
Joined: Mon Mar 30, 2009 10:41 am

Re: Possible to operate a gr1225 without control head?

Postby n8vjp » Fri Oct 14, 2011 4:04 pm

We have a test cable that plugs into the front of the RF chassis and gives the capability to program, use a test mic (GM300 mob mic), and listen to the speaker.


Hopefully Will is still monitoring this thread.

I have an R1225 without the head using the jumper method, but now need to reprogram it. Could you share your pinout for the test cable to get me from ribbon to RJ45?

lspdusnure
New User
Posts: 8
Joined: Sun Apr 24, 2011 9:41 pm
What radios do you own?: astro spectras

Re: Possible to operate a gr1225 without control head?

Postby lspdusnure » Fri Oct 14, 2011 6:23 pm

n8vjp wrote:
We have a test cable that plugs into the front of the RF chassis and gives the capability to program, use a test mic (GM300 mob mic), and listen to the speaker.


Hopefully Will is still monitoring this thread.

I have an R1225 without the head using the jumper method, but now need to reprogram it. Could you share your pinout for the test cable to get me from ribbon to RJ45?

hi just put the head back on and program it then remove it and re install the jumper. easiest way.
randy vanscoy K0RLV

n8vjp
New User
Posts: 4
Joined: Mon Mar 30, 2009 10:41 am

Re: Possible to operate a gr1225 without control head?

Postby n8vjp » Fri Oct 14, 2011 7:13 pm

We don't have the head.

lspdusnure
New User
Posts: 8
Joined: Sun Apr 24, 2011 9:41 pm
What radios do you own?: astro spectras

Re: Possible to operate a gr1225 without control head?

Postby lspdusnure » Sat Oct 15, 2011 10:47 am

get a program cable for the 16 pin option plug on rear of radio. i have control heads of sale on ebay for these cheep.
randy vanscoy K0RLV

User avatar
Mikey
Posts: 410
Joined: Wed Sep 05, 2001 4:00 pm
What radios do you own?: CDM1550 LS+, HT1250, MCS2000

Re: Possible to operate a gr1225 without control head?

Postby Mikey » Sat Oct 15, 2011 11:32 am

I have usd a Standard GM300 Head to program a R1225 Before, works just the same!

lspdusnure
New User
Posts: 8
Joined: Sun Apr 24, 2011 9:41 pm
What radios do you own?: astro spectras

Re: Possible to operate a gr1225 without control head?

Postby lspdusnure » Sun Oct 16, 2011 11:21 am

that makes sense cause a gr1225 repeater has almost same as gm300 logic board so that's a good deal.
randy vanscoy K0RLV

n8vjp
New User
Posts: 4
Joined: Mon Mar 30, 2009 10:41 am

Re: Possible to operate a gr1225 without control head?

Postby n8vjp » Sun Oct 16, 2011 1:55 pm

lspdusnure wrote:get a program cable for the 16 pin option plug on rear of radio.


Thanks for the hint that the accsy plug could also be used. Doing some more Googling, I think I found my answer.
http://www.batlabs.com/gm350.html

RJ45 8pin <----->16pin Accessory Function(Acc)
7 Orange <-----> 6 BUS+
4 Green <-----> 7 Ground
1 Brown <-----> 13 SW B+
3 Yellow <-----> 14 Hook

Will
Posts: 6823
Joined: Tue Sep 04, 2001 4:00 pm

Re: Possible to operate a gr1225 without control head?

Postby Will » Sun Oct 16, 2011 4:45 pm

lspdusnure wrote:snip gr1225 repeater has almost same as gm300 logic board so that's a good deal.


No the logic and RF boards are totally different in the R1225, not even close.

Will
Posts: 6823
Joined: Tue Sep 04, 2001 4:00 pm

Re: Possible to operate a gr1225 without control head?

Postby Will » Sun Oct 16, 2011 5:05 pm

The programming SCI+ does not appear on the 16 pin connector.

J8 is the 15 pin connector on the front of the R1225 radio chassis.

So J8: RADIO --------------------------------------- RJ45 Jack MIC/Prgm
pin 3 is missing
pin 4 RX audio output, low level ------------------- pin 1
pin 7 jumper to 8 SW B+
pin 8 jumper to 7 B+
Pin 9 is SCI+ the programming pin ---------------- pin 2
Pin 12 is ground ------------------------------------- pin 5
pin 13 is PTT ---------------------------------------- pin 3
pin 14 is Mic hi -------------------------------------- pin 4

n8vjp
New User
Posts: 4
Joined: Mon Mar 30, 2009 10:41 am

Re: Possible to operate a gr1225 without control head?

Postby n8vjp » Sun Oct 16, 2011 6:03 pm

Perfect, thanks Will! I knew by posting the link to the GM350, someone would be able to correct it!

User avatar
Mikey
Posts: 410
Joined: Wed Sep 05, 2001 4:00 pm
What radios do you own?: CDM1550 LS+, HT1250, MCS2000

Re: Possible to operate a gr1225 without control head?

Postby Mikey » Sun Oct 16, 2011 7:47 pm

Well the Logic Boards may be different between the GM300 and the R1225 but the GM300 control head will plug right in to where the ribbon cable plugs and give you everything you need to turn it on and program it, then just take the head off and slip the jumper on the pins to power the repeater and your good to go!


Mikey

TWEMARS
Posts: 25
Joined: Sun Feb 26, 2006 10:24 pm
What radios do you own?: More than you can ever imagine

Re: Possible to operate a gr1225 without control head?

Postby TWEMARS » Mon Jan 01, 2018 9:09 am

Hi Guys:

Lets set a few things straight here.

With the control head missing you will not be able to channel steer the radio from the rear connector. You can use the GM300 volume board to program and even run an R1225 but the DISPLAY BOARDS are different.
I have a Halcyon TIMS. It has an audio spectrum analyzer.
I have an IFR 1200. It has an audio distortion analyzer.
I can test and alter the audio response and distortion of my analog radio system to make it sound better.
I have a pair of socks.
Why would I want to put them in my mouth just so I could sound like I'm using a DMR radio?

User avatar
d119
Posts: 3445
Joined: Tue Mar 19, 2002 4:00 pm

Re: Possible to operate a gr1225 without control head?

Postby d119 » Mon Jan 01, 2018 3:07 pm

HOLY ANCIENT THREAD BATMAN! Way to bring back a 7 year old thread. Where's my controller?!?!? ;)


Return to “General Motorola Solutions & Legacy Radio Discussion”

Who is online

Users browsing this forum: Bing [Bot] and 7 guests