One issue I am having with the MC2500 is the MDC1200 Stun/Revive
When trying to send a stun page it would send but would not disable the radio. Yes I checked the other radios for proper programming.
Is there anywhere to change the timer for sending MDC1200 commands.
We are also using pre mdc1200 and I was wondering if I had to send the commands on a channel that we are not transmitting pre mdc1200 on
MC2500 Help
Moderator: Queue Moderator
- twowayradiony
- Posts: 37
- Joined: Fri Jul 20, 2007 7:20 pm
- What radios do you own?: Several!!!
Re: MC2500 Help
You don't say what radios you are transmitting the code to. So we don't know if the radios actually support being stunned or not.
- twowayradiony
- Posts: 37
- Joined: Fri Jul 20, 2007 7:20 pm
- What radios do you own?: Several!!!
Re: MC2500 Help
Sorry... The Mc2500 is hooked up to CDM1250s and I am trying to send the stun command to both the HT1250 and Kenwood portables.
Re: MC2500 Help
Check the pre-time of the MDC commands on the remote. Also verify that you have clean audio and proper levels, this can affect MDC signaling. It's fairly resilient, but not perfect.
- twowayradiony
- Posts: 37
- Joined: Fri Jul 20, 2007 7:20 pm
- What radios do you own?: Several!!!
Re: MC2500 Help
Thanks! Levels are good and pre timer is set to 400
Re: MC2500 Help
Try 600 on the pretime...