Page 1 of 1

Zetron Receiver Monitor

Posted: Sun Feb 01, 2015 3:07 pm
by NSPD
I picked up a used Zetron Model 27 Receiver Monitor that I want to connect to multiple scanners via the external speaker jacks on the back of the scanners.

Anyone have an installation manual for these or experience with them?

My end goal is to use the Model 27 for the main speakers for the scanners, but also tie each scanner into a Centracom Gold Elite for remote access to them.

Re: Zetron Receiver Monitor

Posted: Tue Feb 03, 2015 7:48 am
by Bigred
Pretty simple speaker panel. Stereo amp and two speakers, four mixed inputs per side. All the needed info is silk-screened on the back. If you need cross mute you'll have to play with the inputs to figure it out but easy enough.

Re: Zetron Receiver Monitor

Posted: Wed Feb 04, 2015 7:41 am
by RFguy
I have a soft copy of the manual I can e-mail to you.

Re: Zetron Receiver Monitor

Posted: Wed May 23, 2018 7:00 pm
by pfd radio
Any chance of getting a copy of the manual? I realize this post is over 3 years old.

Re: Zetron Receiver Monitor

Posted: Thu May 24, 2018 6:56 am
by RFguy
pfd radio wrote:Any chance of getting a copy of the manual? I realize this post is over 3 years old.


PM me your e-mail and I'll send it along.

Re: Zetron Receiver Monitor

Posted: Sun Jun 03, 2018 4:51 pm
by pfd radio
RF Guy,
I really appreciate it.

PFD548@gmail.com

Thanks - Mike