Spectra Tac

This forum is for discussions regarding System Infrastructure and Related Equipment. This includes but is not limited to repeaters, base stations, consoles, voters, Voice over IP, system design and implementation, and other related topics.

Moderator: Queue Moderator

Post Reply
User avatar
sean7969
New User
Posts: 8
Joined: Wed Dec 05, 2007 12:27 pm

Spectra Tac

Post by sean7969 »

Was wondering if anyone has used two comparators for a single voting system and how to wire. I have a customer with 7 sites and need to add another but it is full. First one is wired for Voted simulcast connected to Digitac panel.
Karl NVW
Posts: 174
Joined: Wed Sep 03, 2003 7:13 am

Re: Spectra Tac

Post by Karl NVW »

Instructions for adding a second 8-port chassis are in the basic DigiTAC manual. Beyond two gets rather complicated unless you have the full set of manuals and know what you are doing.
Karl - WA8NVW AFA5VB
SHARES + NCS
User avatar
d119
Posts: 3532
Joined: Tue Mar 19, 2002 4:00 pm

Re: Spectra Tac

Post by d119 »

Well the DIGITAC should hold 8 receivers in it's master chassis without an additional chassis, so I'm not quite understanding the problem here.
User avatar
jackhackett
Posts: 1513
Joined: Tue Jun 10, 2003 8:52 am

Re: Spectra Tac

Post by jackhackett »

I'm a bit confused, the post is labeled "Spectra Tac", but then DigiTac is being mentioned, could the original poster give a better description of what their current setup is?
User avatar
sean7969
New User
Posts: 8
Joined: Wed Dec 05, 2007 12:27 pm

Re: Spectra Tac

Post by sean7969 »

Digitac patch panel. Just passes the audio. Comparator is Spectra Tac.
Post Reply

Return to “Base Stations, Repeaters, General Infrastructure”