Batboard

I am looking for the component layout of the HP VHF PA particularly the location of R4560 and R4564.
Thanks

mogman wrote:I am looking for the component layout of the HP VHF PA particularly the location of R4560 and R4564.
Thanks

There is not a lot of service manual information floating around on the Internet that you can download. I did find a comment about the PA that you might want to read if your looking to convert one on VHF to the ham band. Go here on the repeater builders site: http://www.repeater-builder.com/motorol ... index.html and see if anything there might help.

Jim

Thanks, I did find some time ago an article on changing the PA ID, but no layout of the board was given, probably can figure it out knowing the original values but would be easier with some documentation, there is a very basic block diagram in the manual I have that references the PA ID but not much useful information there.