Quantar to Astro Tac Pinouts

This forum is for discussions regarding System Infrastructure and Related Equipment. This includes but is not limited to repeaters, base stations, consoles, voters, Voice over IP, system design and implementation, and other related topics.

Moderator: Queue Moderator

Post Reply
RadioPilot
New User
Posts: 2
Joined: Mon Sep 19, 2016 3:46 pm

Quantar to Astro Tac Pinouts

Post by RadioPilot »

Anyone know the correct pinouts for RJ 45 to RJ 45 from V24 port 1 of Quantar to port 1 of an AstroTac Comparator. Also there are dip switches on the wireline card. Do those have to be configured a different way? Trying to link multiple sites together.
turtle9832
Posts: 155
Joined: Sun Mar 14, 2010 12:26 pm

Re: Quantar to Astro Tac Pinouts

Post by turtle9832 »

you got the manual?

If not, PM your email to me and ill send it over.

Do you have your links set up?

Where are you located?
User avatar
chartofmaryland
Batboard $upporter
Posts: 411
Joined: Sat Dec 28, 2002 11:25 pm
What radios do you own?: Alot

Re: Quantar to Astro Tac Pinouts

Post by chartofmaryland »

The cable between the units needs to be a V.24 null

This is just like a crossover cable for network but follows the V.24 pins instead.

TX 2 RX
RX 2 TX
TXCLK 2 RXCLK
RXCLK 2 TXCLK
CTS 2 RTS
GND 2 GND

Cable distance is limited to 52' max

You will need to grab the page from repeater builder or the manual for the V.24 daughter card with the wireline card to follow along with the dip switch configuration for local and microwave or remote. S101 on both devices

Once you do this, you need to program the ports for internal timing and you should have a link

CoM
If the lights are out when you leave the station and then come on the second you key up, you know you have enough power.
Post Reply

Return to “Base Stations, Repeaters, General Infrastructure”