Users may not create topics, posts, or private messages containing or relating to the following material (especially pertaining to Motorola copyrighted software, unless you want Motorola to come along and shut this site down):

  • Listing for sale or trade of, or links to sites offering for sale or trade of, or giving away, Radio
    Service Software (RSS) or Customer Programming Software (CPS)
  • Profanity, pornography, defamation, or slanderous remarks directed towards any individual or entity
  • Commercial advertising (except in the Batboard Vendors forum, as approved by the Admin/Mod Staff)
  • Any other items which may be deemed as offensive

If any topics, posts, or private messages containing or relating to the aforementioned material are brought to the attention of the Admin/Mod Staff, they will be deleted.

Additional FAQ items appear here in Forum Rules. Please review them for posting guidelines and further clarification.

MTR2000 COR Active during PTT

This forum is for discussions regarding System Infrastructure and Related Equipment. This includes but is not limited to repeaters, base stations, consoles, voters, Voice over IP, system design and implementation, and other related topics.

Moderator: Queue Moderator

ve3nsv
Posts: 277
Joined: Sat May 27, 2006 8:43 am

MTR2000 COR Active during PTT

Postby ve3nsv » Thu Apr 06, 2017 5:30 am

Has anybody seen this issue where any COR line on the MTR2000 goes active when the PTT line is used? I've tried PTT and COR off the J5 and J7 connector with the same results. The station is programmed as a base station.

User avatar
Vercomm
Posts: 426
Joined: Mon Apr 12, 2004 7:00 pm

Re: MTR2000 COR Active during PTT

Postby Vercomm » Fri Apr 07, 2017 1:16 am

In the station programming, what is you're analogue rx activation set to? Csq or csq/pl?

What station firmware does your unit have?
"Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, torn up and shouting... "Holy Sh*t...what a ride!!"

ve3nsv
Posts: 277
Joined: Sat May 27, 2006 8:43 am

Re: MTR2000 COR Active during PTT

Postby ve3nsv » Fri Apr 07, 2017 7:32 am

Firmware is 3.02.003 and rx activation is programmed for carrier & PL.

User avatar
Vercomm
Posts: 426
Joined: Mon Apr 12, 2004 7:00 pm

Re: MTR2000 COR Active during PTT

Postby Vercomm » Fri Apr 07, 2017 7:44 am

There is a firmware update for your repeater...but not sure that is the issue. Are you connecting to cor on system connector j5 c02?
"Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, torn up and shouting... "Holy Sh*t...what a ride!!"

ve3nsv
Posts: 277
Joined: Sat May 27, 2006 8:43 am

Re: MTR2000 COR Active during PTT

Postby ve3nsv » Fri Apr 07, 2017 9:57 am

Yes I have tried C02, B03 & C03 and 15 MRTI Rx Carrier* O.C. Goes to ground with properly coded carrier.


Return to “Base Stations, Repeaters, General Infrastructure”

Who is online

Users browsing this forum: No registered users and 1 guest