Deskset RCH-3000, L3208A, MCS2000 III (need manuals and help)

This forum is for discussions regarding System Infrastructure and Related Equipment. This includes but is not limited to repeaters, base stations, consoles, voters, Voice over IP, system design and implementation, and other related topics.

Moderator: Queue Moderator

Post Reply
akrovers
New User
Posts: 14
Joined: Mon Oct 10, 2011 12:02 pm

Deskset RCH-3000, L3208A, MCS2000 III (need manuals and help)

Post by akrovers »

Hello all,

Just ordered a box of RCH3000 desk-sets to use around the house and shop. I also ordered a L3208A digital junction box to interface to the MCS2000 III. I noticed the L3208A has one port labeled RCH, is this the only one that will work with the RCH3000? if so what if I need to have several desksets connected? I don't have any of the manuals (aside from MCS2000) so I could use those if someone has a copy.

Thanks

Matt
User avatar
W3AXL
Posts: 114
Joined: Fri Sep 04, 2015 9:02 am
What radios do you own?: an unhealthy amount of them

Re: Deskset RCH-3000, L3208A, MCS2000 III (need manuals and help)

Post by W3AXL »

The L3208 is IIRC meant for use with the MC3000 deskset series. The RCH port is the only one meant for the RCH3000. There's an older junction box whose part number I can't recall that has ports for multiple RCH3000s.

I have several copies of the RCH3000 manual so I scanned one and uploaded it. Here it is with fancy OCR that sort-of works.

I've got several RCH's up and running for my base radios but I have yet to set up multiple desksets with a junction box, so unfortuantely I can't help you with your specific issue. I can tell you that a single RCH3000 will interface directly to an MCS2000 M3 with no issues or junction box.

Good luck!
User avatar
wavetar
Administrator
Posts: 7340
Joined: Sun Sep 09, 2001 4:00 pm

Re: Deskset RCH-3000, L3208A, MCS2000 III (need manuals and help)

Post by wavetar »

The part# for the RCH3000 digital junction box was CDN1337A. Good luck in your search, they've been NLA for at least 15 years.
No trees were harmed in the posting of this message...however an extraordinarily large number of electrons were horribly inconvenienced.

Welcome to the /\/\achine.
akrovers
New User
Posts: 14
Joined: Mon Oct 10, 2011 12:02 pm

Re: Deskset RCH-3000, L3208A, MCS2000 III (need manuals and help)

Post by akrovers »

Thanks for the reply, I would go with the MC3000 desk-sets but like the look and function of the RCH much more. I will keep a look out for the old junction box.

Matt
akrovers
New User
Posts: 14
Joined: Mon Oct 10, 2011 12:02 pm

Re: Deskset RCH-3000, L3208A, MCS2000 III (need manuals and help)

Post by akrovers »

I was finally able to locate the rch junction box cdn1337, but without a manual, can anyone help with jumpers and general setup for the MCS2000?

Thanks
Matt
User avatar
W3AXL
Posts: 114
Joined: Fri Sep 04, 2015 9:02 am
What radios do you own?: an unhealthy amount of them

Re: Deskset RCH-3000, L3208A, MCS2000 III (need manuals and help)

Post by W3AXL »

Same manual as above. It's included towards the back. There are only a couple jumpers to move and they're all spelled out in a table.
Post Reply

Return to “Base Stations, Repeaters, General Infrastructure”