Quantar peripheral tray interface jack info needed

This forum is for discussions regarding System Infrastructure and Related Equipment. This includes but is not limited to repeaters, base stations, consoles, voters, Voice over IP, system design and implementation, and other related topics.

Moderator: Queue Moderator

Post Reply
mogman
Posts: 127
Joined: Tue Aug 05, 2008 2:25 pm

Quantar peripheral tray interface jack info needed

Post by mogman »

I am looking for information on the mating connector for the peripheral tray interface jack on the Quantar, it is the connector "J" OR #27 on the back of the unit, it is a dual row 10 pin connector. :o
User avatar
d119
Posts: 3532
Joined: Tue Mar 19, 2002 4:00 pm

Re: Quantar peripheral tray interface jack info needed

Post by d119 »

http://www.repeater-builder.com/motorol ... -board.pdf

It is the same connector as the Centracom headset jack box cables. I have used the aforementioned cables to connect external power on connector #10 to power external repeater controllers.

it is a 10-pin AMP style header-connector type arrangement that is keyed.

These have the appropriate cables and connectors on them:

http://www.ebay.com/itm/Motorola-Centra ... SwuLZY4oAz
mogman
Posts: 127
Joined: Tue Aug 05, 2008 2:25 pm

Re: Quantar peripheral tray interface jack info needed

Post by mogman »

Thanks, that should give me enough info to go on!!
Boy AMP makes allot of connectors, I have a pretty good pile of Centracom "junk" might find one there.
Also I found what looks like the identical chassis connector AMP part# 104338-1so finding the mate should be easy.
mogman
Posts: 127
Joined: Tue Aug 05, 2008 2:25 pm

Re: Quantar peripheral tray interface jack info needed

Post by mogman »

This looks like the mating connector, in case anyone in interested.
Housing AMP 102387-1
Contact AMP 6-87756-8
Post Reply

Return to “Base Stations, Repeaters, General Infrastructure”