Quantar PA identification please

This forum is for discussions regarding System Infrastructure and Related Equipment. This includes but is not limited to repeaters, base stations, consoles, voters, Voice over IP, system design and implementation, and other related topics.

Moderator: Queue Moderator

Post Reply
mogman
Posts: 127
Joined: Tue Aug 05, 2008 2:25 pm

Quantar PA identification please

Post by mogman »

I am trying to ID a Quantar PA TLD1295A searched everywhere with out luck :o
mogman
Posts: 127
Joined: Tue Aug 05, 2008 2:25 pm

Re: Quantar PA identification please

Post by mogman »

Well to answer my own question, I assumed it was a VHF because of the D in the part#, installed it in an R2 VHF Quantar and she made 125W no sweat, did not get rejected by the codeplug so it is obviously a R2 VHF PA, can add that number to the list...
User avatar
alex
Administrator
Posts: 5761
Joined: Mon Sep 03, 2001 4:00 pm

Re: Quantar PA identification please

Post by alex »

In the RSS you can pick the band and such and then click "Validate Configuration" and I suspect it will tell you if whatever combination you have setup in the codeplug does not match what is physically in the station. That's another way to play the game (the part number question should be far easier way to do it but this may work out in a pinch).
The Radio Information Board: http://www.radioinfoboard.com
Your source for information on: Harris/Ma-Comm/EFJ/RELM/Kenwood/ICOM/Thales, equipment.
Post Reply

Return to “Base Stations, Repeaters, General Infrastructure”