Users may not create topics, posts, or private messages containing or relating to the following material (especially pertaining to Motorola copyrighted software, unless you want Motorola to come along and shut this site down):

  • Listing for sale or trade of, or links to sites offering for sale or trade of, or giving away, Radio
    Service Software (RSS) or Customer Programming Software (CPS)
  • Profanity, pornography, defamation, or slanderous remarks directed towards any individual or entity
  • Commercial advertising (except in the Batboard Vendors forum, as approved by the Admin/Mod Staff)
  • Any other items which may be deemed as offensive

If any topics, posts, or private messages containing or relating to the aforementioned material are brought to the attention of the Admin/Mod Staff, they will be deleted.

Additional FAQ items appear here in Forum Rules. Please review them for posting guidelines and further clarification.

Quantar Simulcast

This forum is for discussions regarding System Infrastructure and Related Equipment. This includes but is not limited to repeaters, base stations, consoles, voters, Voice over IP, system design and implementation, and other related topics.

Moderator: Queue Moderator

PWRMAD
New User
Posts: 4
Joined: Fri Apr 17, 2009 5:59 pm
What radios do you own?: all of them!

Quantar Simulcast

Postby PWRMAD » Fri Oct 13, 2017 10:42 am

Hi
I am trying to configure a Quantar for simulcast operation using the 50 pin telco interface on the rear of the unit. I would like to connect the TX audio to pin 9 Gen TX Data - and pin 34 Gen TX Data +. Here comes the hard part what is the wildcard configuration to allow the me to turn on the transmitter and pass simulcast audio. I know how to configure the wildcard to pass line audio but I to pass wide band simulcast audio. Any ideas will be greatly appreciated.

Thanks Guys
Randy

User avatar
Bill_G
Posts: 3052
Joined: Thu Sep 17, 2009 5:00 am

Re: Quantar Simulcast

Postby Bill_G » Fri Nov 10, 2017 4:25 pm

Sorry I didn't see this earlier. Pins 9 and 34 are the correct pins to use for simulcast audio input. To use that WB input, you need to set up the wildcard table, define a function, and wire it up correctly.

I typically use input 9 - an optoisolator - on pins 22(+) and 47(-) for the external PTT input. Jumper 22 to 8 (5vdc) to provide bias to the input. Put your external PTT on pin 47. When PTT goes low, it activates the station PTT via the rules in the wildcard table.

To set up the wildcard table, you have to do it in reverse Polish notation. Define a table EXT PTT, State = INPUT 9 (use drop down menu), condition blank, no other states, Action = DEKEY FROM WB, Inaction = KEY FROM WB.

There you go. Rock on.


Return to “Base Stations, Repeaters, General Infrastructure”

Who is online

Users browsing this forum: Google [Bot] and 1 guest