Users may not create topics, posts, or private messages containing or relating to the following material (especially pertaining to Motorola copyrighted software, unless you want Motorola to come along and shut this site down):

  • Listing for sale or trade of, or links to sites offering for sale or trade of, or giving away, Radio
    Service Software (RSS) or Customer Programming Software (CPS)
  • Profanity, pornography, defamation, or slanderous remarks directed towards any individual or entity
  • Commercial advertising (except in the Batboard Vendors forum, as approved by the Admin/Mod Staff)
  • Any other items which may be deemed as offensive

If any topics, posts, or private messages containing or relating to the aforementioned material are brought to the attention of the Admin/Mod Staff, they will be deleted.

Additional FAQ items appear here in Forum Rules. Please review them for posting guidelines and further clarification.

CENTRACOM II/II+ Part Numbers

This forum is for discussions regarding System Infrastructure and Related Equipment. This includes but is not limited to repeaters, base stations, consoles, voters, Voice over IP, system design and implementation, and other related topics.

Moderator: Queue Moderator

User avatar
d119
Posts: 2938
Joined: Tue Mar 19, 2002 4:00 pm

CENTRACOM II/II+ Part Numbers

Postby d119 » Sun Apr 01, 2007 2:41 pm

BLN1145 = Dual Receive (DR) Module - two receive-only channels
BLN1170 = Trunked Operator Multiplex Interface (TOMI, CC II+)
BLN1172 = Trunking Central Controller Interface (TIMI)
BLN1173 = Logging Operator Multiplex Interface (LOMI)
BLN6845 = Audio Expansion Interface (AEI, required for TOMI)
BLN6622 = Operator Multiplex Interface (OMI, CC II)
BLN6755 = RS232 Interface Module (Programming, etc.)
BLN6650 = System Timer (older card w/ potentiometer in front)
BLN7011 = System Timer (current card with SMT LED's)
BLN6664 = 3/6 AUX I/O (3in 6out)
BLN6654 = Base Interface Module (BIM)
BKN6135 = "Y" Interface cable from backplane & AEI to OP position
BLN6825 = Expanded Operator Multiplex Interface (OMI)

The following are courtesy of Bruce1807:

BGN1005 = CEB Card Cage w/o backplane
BLN1147 = Punch Block with Spark Gaps
BLN1148 = Headset Interface Jack
BLN6200 = 6 Outlet AC Power Strip
BLN6665 = Base Interface Module with DC Control & Line Operated Busy Light
BLN6666 = Base Interface Module Tone Control w/ Line Op Busy Light
BLN6725 = AUX II 6In/2Out AUX I/O
QRN4250 = CEB Interface Without Pilot Tone Output
QRN4546 = ROCI Without tones
QRN4547 = CORI Without tones

The following are part numbers and descriptions for CCM panels used in Button & LED consoles. These correspond to the listings in the Centracom Series2 programming software. There may be errors in this list, and as always, it isn't complete. I didn't include any detailed descriptions about the trunking panels as I have no interest or use for them and didn't explore them fully.

Channel Control Modules:

Q2960 = T8/R8 8 Frequency Channel Control Module
B1436 = Auxiliary Control
B1432 = Dual Receive Channel Control Module
B1408-1 = Receive Only Channel Control Module
B1439 = Comparator Display
B1433 = Phone Patch Interface
B1632 = Phone Interface
B1403 = Speaker
B1403-1 = Speaker
B1448 = Call Check Control Module
B1621 = Trunking
B1619 = Trunking
B1620 = Trunking
B1622 = Trunking
B1623 = Trunking
B1665 = Trunking
Q2951 = Trunking
B1655 = Trunking
B1664 = Trunking
B1663 = Trunking
B1662 = Trunking
B1695 = Trunking
B1675 = Trunking
Q3194A = Trunking (CAD Interface)
Q3095A = Mini T1/R1 1CH Channel Control Module (Half Module)
Q3107A = T2/R2 2CH Channel Control Module
Q3108A = T8/R8 8CH Channel Control Module
Q2948 = CAD Interface
Q2949 = CAD Interface
Q2971 = Tone HEAR Control Module
Q2939-1 = Receive Only Module
Q2939-4 = Receive Only Module (Poss. Quad Receive Only)
B1654 = T1/R1 1CH Display Channel Control Module (DCCM)*
B1656 = T2/R2 2CH Display Channel Control Module (DCCM)*
B1657 = T4/R4 4CH Display Channel Control Module (DCCM)*
B1658 = T8/R8 8CH Display Channel Control Module (DCCM)*
B1661A = Receive Only Module

*DCCM's are not compatible with standard OMI cards. May be a Centracom II+ only feature.

More to follow.
Last edited by d119 on Thu Dec 23, 2010 6:47 pm, edited 8 times in total.

User avatar
Bruce1807
Posts: 1203
Joined: Mon Jan 16, 2006 7:18 am

Postby Bruce1807 » Sun Apr 01, 2007 8:19 pm

CARD CAGE, CEB, WITHOUT BACKPLANE BGN1005
PUNCH BLOCK W/ SPARK GAP BLN1147
HEADSET JACK BLN1148
AC POWER STRIP, 6 OUTLET BLN6200
BOARD, DC CONTROL W/ LOBL BLN6665
BOARD, TONE LOBL BLN6666
BOARD, AUX II, 6 INPUT/2 OUTPUT BLN6725
RS232 BOARD BLN6755
BD INTFC CEB W/O PILOT TN-OUT QRN4250
BOARD, REMOTE INTFC, OP, W/0 TONES QRN4546
BOARD, REMOTE INTERFACE, OP, W/0 TONES (CORI) QRN4547

User avatar
wb4bli
Posts: 92
Joined: Sun Jan 28, 2007 8:13 am

Postby wb4bli » Mon Apr 02, 2007 7:40 am

I am getting 2 different things here. I either have a II+ or a II. This is the list of what cards I have. Can you please help me verify if I do have a II+?

10 BLN-6654
9 BLN-6665
4 BLN-6664
3 BLN-1196
1 BLN-6825
2 BLN-6650
3 BLN-6825
6 BLN-6845
1 BLN-1145
1 BLN-6755
3 BPN-1009

User avatar
d119
Posts: 2938
Joined: Tue Mar 19, 2002 4:00 pm

Postby d119 » Mon Apr 02, 2007 5:25 pm

wb4bli wrote:I am getting 2 different things here. I either have a II+ or a II. This is the list of what cards I have. Can you please help me verify if I do have a II+?

10 BLN-6654
9 BLN-6665
4 BLN-6664
3 BLN-1196
1 BLN-6825
2 BLN-6650
3 BLN-6825
6 BLN-6845
1 BLN-1145
1 BLN-6755
3 BPN-1009


Based on the fact you have an OMI (BLN6825) it appears you have the older EPROM based CCII that requires the PROM programmer not the RSS.

User avatar
alex
Administrator
Posts: 5609
Joined: Mon Sep 03, 2001 4:00 pm
Location: Batboard NOC
Contact:

Re: CENTRACOM II/II+ Part Numbers

Postby alex » Fri Feb 08, 2008 10:16 am

Not to bump an old topic, but I happened to have come across what looks to be a complete CEB with power supplies in the trash last night. Thankfully, I own a large enough vehicle to secure both racks before they ended up in the trash...

I seem to have a large number of the same boards that WB4LBI has, however, I do not have the matching console yet (I've since asked a friend of mine to call his buddy where they came from to find out when they are chucking the rest of the console... they have a Zetron now).

The setup looks to be pretty complete with punch down blocks, cables, etc. Doesn't look like anything was cut (very much to my amazement!). This was probably sitting in their basement for a couple of years.

Is there any harm in hooking up the power supplies to the CEB and just throwing the switch to see if it still lights up? Anything I can do to test and see if the stuff works?

I can post photo's of the setup/cards in a bit, gotta size them down a bit.

-Alex
The Radio Information Board: http://www.radioinfoboard.com
Your source for information on: Harris/Ma-Comm/EFJ/RELM/Kenwood/ICOM/Thales, equipment.


Return to “Base Stations, Repeaters, General Infrastructure”

Who is online

Users browsing this forum: No registered users and 2 guests