CENTRACOM II/II+ Part Numbers
Posted: Sun Apr 01, 2007 2:41 pm
BLN1145 = Dual Receive (DR) Module - two receive-only channels
BLN1170 = Trunked Operator Multiplex Interface (TOMI, CC II+)
BLN1172 = Trunking Central Controller Interface (TIMI)
BLN1173 = Logging Operator Multiplex Interface (LOMI)
BLN6845 = Audio Expansion Interface (AEI, required for TOMI)
BLN6622 = Operator Multiplex Interface (OMI, CC II)
BLN6755 = RS232 Interface Module (Programming, etc.)
BLN6650 = System Timer (older card w/ potentiometer in front)
BLN7011 = System Timer (current card with SMT LED's)
BLN6664 = 3/6 AUX I/O (3in 6out)
BLN6654 = Base Interface Module (BIM)
BKN6135 = "Y" Interface cable from backplane & AEI to OP position
BLN6825 = Expanded Operator Multiplex Interface (OMI)
The following are courtesy of Bruce1807:
BGN1005 = CEB Card Cage w/o backplane
BLN1147 = Punch Block with Spark Gaps
BLN1148 = Headset Interface Jack
BLN6200 = 6 Outlet AC Power Strip
BLN6665 = Base Interface Module with DC Control & Line Operated Busy Light
BLN6666 = Base Interface Module Tone Control w/ Line Op Busy Light
BLN6725 = AUX II 6In/2Out AUX I/O
QRN4250 = CEB Interface Without Pilot Tone Output
QRN4546 = ROCI Without tones
QRN4547 = CORI Without tones
The following are part numbers and descriptions for CCM panels used in Button & LED consoles. These correspond to the listings in the Centracom Series2 programming software. There may be errors in this list, and as always, it isn't complete. I didn't include any detailed descriptions about the trunking panels as I have no interest or use for them and didn't explore them fully.
Channel Control Modules:
Q2960 = T8/R8 8 Frequency Channel Control Module
B1436 = Auxiliary Control
B1432 = Dual Receive Channel Control Module
B1408-1 = Receive Only Channel Control Module
B1439 = Comparator Display
B1433 = Phone Patch Interface
B1632 = Phone Interface
B1403 = Speaker
B1403-1 = Speaker
B1448 = Call Check Control Module
B1621 = Trunking
B1619 = Trunking
B1620 = Trunking
B1622 = Trunking
B1623 = Trunking
B1665 = Trunking
Q2951 = Trunking
B1655 = Trunking
B1664 = Trunking
B1663 = Trunking
B1662 = Trunking
B1695 = Trunking
B1675 = Trunking
Q3194A = Trunking (CAD Interface)
Q3095A = Mini T1/R1 1CH Channel Control Module (Half Module)
Q3107A = T2/R2 2CH Channel Control Module
Q3108A = T8/R8 8CH Channel Control Module
Q2948 = CAD Interface
Q2949 = CAD Interface
Q2971 = Tone HEAR Control Module
Q2939-1 = Receive Only Module
Q2939-4 = Receive Only Module (Poss. Quad Receive Only)
B1654 = T1/R1 1CH Display Channel Control Module (DCCM)*
B1656 = T2/R2 2CH Display Channel Control Module (DCCM)*
B1657 = T4/R4 4CH Display Channel Control Module (DCCM)*
B1658 = T8/R8 8CH Display Channel Control Module (DCCM)*
B1661A = Receive Only Module
*DCCM's are not compatible with standard OMI cards. May be a Centracom II+ only feature.
More to follow.
BLN1170 = Trunked Operator Multiplex Interface (TOMI, CC II+)
BLN1172 = Trunking Central Controller Interface (TIMI)
BLN1173 = Logging Operator Multiplex Interface (LOMI)
BLN6845 = Audio Expansion Interface (AEI, required for TOMI)
BLN6622 = Operator Multiplex Interface (OMI, CC II)
BLN6755 = RS232 Interface Module (Programming, etc.)
BLN6650 = System Timer (older card w/ potentiometer in front)
BLN7011 = System Timer (current card with SMT LED's)
BLN6664 = 3/6 AUX I/O (3in 6out)
BLN6654 = Base Interface Module (BIM)
BKN6135 = "Y" Interface cable from backplane & AEI to OP position
BLN6825 = Expanded Operator Multiplex Interface (OMI)
The following are courtesy of Bruce1807:
BGN1005 = CEB Card Cage w/o backplane
BLN1147 = Punch Block with Spark Gaps
BLN1148 = Headset Interface Jack
BLN6200 = 6 Outlet AC Power Strip
BLN6665 = Base Interface Module with DC Control & Line Operated Busy Light
BLN6666 = Base Interface Module Tone Control w/ Line Op Busy Light
BLN6725 = AUX II 6In/2Out AUX I/O
QRN4250 = CEB Interface Without Pilot Tone Output
QRN4546 = ROCI Without tones
QRN4547 = CORI Without tones
The following are part numbers and descriptions for CCM panels used in Button & LED consoles. These correspond to the listings in the Centracom Series2 programming software. There may be errors in this list, and as always, it isn't complete. I didn't include any detailed descriptions about the trunking panels as I have no interest or use for them and didn't explore them fully.
Channel Control Modules:
Q2960 = T8/R8 8 Frequency Channel Control Module
B1436 = Auxiliary Control
B1432 = Dual Receive Channel Control Module
B1408-1 = Receive Only Channel Control Module
B1439 = Comparator Display
B1433 = Phone Patch Interface
B1632 = Phone Interface
B1403 = Speaker
B1403-1 = Speaker
B1448 = Call Check Control Module
B1621 = Trunking
B1619 = Trunking
B1620 = Trunking
B1622 = Trunking
B1623 = Trunking
B1665 = Trunking
Q2951 = Trunking
B1655 = Trunking
B1664 = Trunking
B1663 = Trunking
B1662 = Trunking
B1695 = Trunking
B1675 = Trunking
Q3194A = Trunking (CAD Interface)
Q3095A = Mini T1/R1 1CH Channel Control Module (Half Module)
Q3107A = T2/R2 2CH Channel Control Module
Q3108A = T8/R8 8CH Channel Control Module
Q2948 = CAD Interface
Q2949 = CAD Interface
Q2971 = Tone HEAR Control Module
Q2939-1 = Receive Only Module
Q2939-4 = Receive Only Module (Poss. Quad Receive Only)
B1654 = T1/R1 1CH Display Channel Control Module (DCCM)*
B1656 = T2/R2 2CH Display Channel Control Module (DCCM)*
B1657 = T4/R4 4CH Display Channel Control Module (DCCM)*
B1658 = T8/R8 8CH Display Channel Control Module (DCCM)*
B1661A = Receive Only Module
*DCCM's are not compatible with standard OMI cards. May be a Centracom II+ only feature.
More to follow.