Quantar PTT

This forum is for discussions regarding System Infrastructure and Related Equipment. This includes but is not limited to repeaters, base stations, consoles, voters, Voice over IP, system design and implementation, and other related topics.

Moderator: Queue Moderator

Post Reply
es88
New User
Posts: 7
Joined: Wed Jan 23, 2008 10:22 am

Quantar PTT

Post by es88 »

Would anybody know a simple way to key a Quantar PTT from the station backplane. I have the manual for the Quantar, and have been looking at the info from the system applications section. I have looked at Pin 47,22,8,18,43,7 as shown in the book. The manual states these are default I/O settings would I have to instruct the base to activate these default I/O pins. Is this a wildcard feature or default. Any info would be greatly appreciated.

Thanks

ES88
Top
Dan562
Posts: 533
Joined: Mon Aug 23, 2004 7:30 pm
What radios do you own?: Kenwood, Yaesu, ICOM, Motorola

Re: Quantar PTT

Post by Dan562 »

First of all you haven't mentioned whether you need to provide just a PTT with a Carrier and/or Carrier with TPL or DPL Encode. Exactly what are you trying to accomplish with the System Connector and Base Station?
Top
Post Reply

Return to “Base Stations, Repeaters, General Infrastructure”