Users may not create topics, posts, or private messages containing or relating to the following material (especially pertaining to Motorola copyrighted software, unless you want Motorola to come along and shut this site down):

  • Listing for sale or trade of, or links to sites offering for sale or trade of, or giving away, Radio
    Service Software (RSS) or Customer Programming Software (CPS)
  • Profanity, pornography, defamation, or slanderous remarks directed towards any individual or entity
  • Commercial advertising (except in the Batboard Vendors forum, as approved by the Admin/Mod Staff)
  • Any other items which may be deemed as offensive

If any topics, posts, or private messages containing or relating to the aforementioned material are brought to the attention of the Admin/Mod Staff, they will be deleted.

Additional FAQ items appear here in Forum Rules. Please review them for posting guidelines and further clarification.

Minitor II - Disable Alert Tone

This forum is focused on discussing Digital and Voice paging equipment, protocol's, infrastructure, and Motorola specific hardware used. Please refrain from discussing different ways to monitor the digital paging systems due to the legalities of such.

Moderator: Queue Moderator

User avatar
SteveC0625
Posts: 446
Joined: Sat Jan 01, 2011 9:46 am
What radios do you own?: CDM's, CP's, CM's, and more

Minitor II - Disable Alert Tone

Postby SteveC0625 » Sun May 12, 2013 6:40 am

I searched here and around the net but didn't find anything specific on doing this. I have a standard Minitor II that I want to disable the alert tone but not the alert function. Can anyone tell me how to do this? I have the Minitor II info from batlabs, but I am not seeing a jumper change or part removal that will accomplish this.

Thanks so much.

kd5wfy
New User
Posts: 24
Joined: Wed Oct 03, 2007 3:48 pm

Re: Minitor II - Disable Alert Tone

Postby kd5wfy » Thu Dec 25, 2014 9:21 am

Yes. I've actually done the same thing for my pager that stays in my room for night alerts.

If you have a steady hand you will need to remove the SMD resistor R309

The light will still flash while it is alerting, and the pin that goes to the amp charger will still works as well.

User avatar
SteveC0625
Posts: 446
Joined: Sat Jan 01, 2011 9:46 am
What radios do you own?: CDM's, CP's, CM's, and more

Re: Minitor II - Disable Alert Tone

Postby SteveC0625 » Fri Dec 26, 2014 1:20 pm

kd5wfy wrote:Yes. I've actually done the same thing for my pager that stays in my room for night alerts.

If you have a steady hand you will need to remove the SMD resistor R309

The light will still flash while it is alerting, and the pin that goes to the amp charger will still works as well.

Thank you!


Return to “Motorola Digital and Voice Paging”

Who is online

Users browsing this forum: No registered users and 1 guest