Users may not create topics, posts, or private messages containing or relating to the following material (especially pertaining to Motorola copyrighted software, unless you want Motorola to come along and shut this site down):

  • Listing for sale or trade of, or links to sites offering for sale or trade of, or giving away, Radio
    Service Software (RSS) or Customer Programming Software (CPS)
  • Profanity, pornography, defamation, or slanderous remarks directed towards any individual or entity
  • Commercial advertising (except in the Batboard Vendors forum, as approved by the Admin/Mod Staff)
  • Any other items which may be deemed as offensive

If any topics, posts, or private messages containing or relating to the aforementioned material are brought to the attention of the Admin/Mod Staff, they will be deleted.

Additional FAQ items appear here in Forum Rules. Please review them for posting guidelines and further clarification.

Minitor V Amplified Charger Volume issue

This forum is focused on discussing Digital and Voice paging equipment, protocol's, infrastructure, and Motorola specific hardware used. Please refrain from discussing different ways to monitor the digital paging systems due to the legalities of such.

Moderator: Queue Moderator

haligen
New User
Posts: 2
Joined: Tue Jul 03, 2007 7:58 am

Minitor V Amplified Charger Volume issue

Postby haligen » Fri Jun 13, 2014 9:08 pm

Looking through the archives I can't seem to find any mention of our current issue. Recently during rebanding we switch all of our fire stations from Minitor IV's to Minitor V's in amplified chargers. The problem we seem to be having is that audio output doing a slow ramp up. It starts out real soft gradually getting louder. If the audio output is taken from the base of the pager into our amp system its full volume from the start. Once in the charger base the volume starts the ramping. I've tried both outputs; the 1/8 to a rca and the din with a resistor voltage divider circuit to the amps line level input. Short of drilling a hole in the charger to reach the base of the pager I'm at a loss, and would welcome any suggestions.

Return to “Motorola Digital and Voice Paging”

Who is online

Users browsing this forum: No registered users and 1 guest