Users may not create topics, posts, or private messages containing or relating to the following material (especially pertaining to Motorola copyrighted software, unless you want Motorola to come along and shut this site down):

  • Listing for sale or trade of, or links to sites offering for sale or trade of, or giving away, Radio
    Service Software (RSS) or Customer Programming Software (CPS)
  • Profanity, pornography, defamation, or slanderous remarks directed towards any individual or entity
  • Commercial advertising (except in the Batboard Vendors forum, as approved by the Admin/Mod Staff)
  • Any other items which may be deemed as offensive

If any topics, posts, or private messages containing or relating to the aforementioned material are brought to the attention of the Admin/Mod Staff, they will be deleted.

Additional FAQ items appear here in Forum Rules. Please review them for posting guidelines and further clarification.

Minitor V programming software issue

This forum is focused on discussing Digital and Voice paging equipment, protocol's, infrastructure, and Motorola specific hardware used. Please refrain from discussing different ways to monitor the digital paging systems due to the legalities of such.

Moderator: Queue Moderator

firerescueluke
New User
Posts: 17
Joined: Sat Feb 16, 2008 1:27 pm

Minitor V programming software issue

Postby firerescueluke » Wed Jan 07, 2015 12:54 pm

Hello,
I have been using the PPS for the Minitor V for several years and now I have had to upgrade to a different laptop. (Both machines run Win XP) The old Dell, when I can get it to boot, runs the program just fine, but the Panasonic Toughbook will load the software but it will not read the pager. All setting are the same in both machines. I also downloaded the latest software from Motorola and still no read. Coincidentally, our fire dept has had the same issue recently. The computer stopped reading the pagers. A reinstall was done and still no read. (Serial transmission error) Any suggestions? I'm stumped! Thanks

Al
Posts: 1045
Joined: Tue Sep 04, 2001 4:00 pm

Re: Minitor V programming software issue

Postby Al » Sat Jan 10, 2015 6:38 pm

The problem that you're seeing is not too uncommon. The Min Vs have been in service long enough so that corrosion/dirt likely has affected the conductivity of the [recessed]thinly gold plated contacts on the bottoms of the pagers. Try cleaning them with precision cleaning swabs that fit into the hole recesses in the pager's bottom(Caig Labs makes them, p/n SWPP-100) with deOxit 100 applied to the swab tips. Also check that the pogo pin contacts in the programmer cradle are clean.

User avatar
SteveC0625
Posts: 446
Joined: Sat Jan 01, 2011 9:46 am
What radios do you own?: CDM's, CP's, CM's, and more

Re: Minitor V programming software issue

Postby SteveC0625 » Sun Jan 11, 2015 8:29 am

firerescueluke wrote:Hello,
I have been using the PPS for the Minitor V for several years and now I have had to upgrade to a different laptop. (Both machines run Win XP) The old Dell, when I can get it to boot, runs the program just fine, but the Panasonic Toughbook will load the software but it will not read the pager. All setting are the same in both machines. I also downloaded the latest software from Motorola and still no read. Coincidentally, our fire dept has had the same issue recently. The computer stopped reading the pagers. A reinstall was done and still no read. (Serial transmission error) Any suggestions? I'm stumped! Thanks

+1 on Al's response to you.

FWIW, I am issued a pager that is at least 3 years old. I don't carry it much in favor of having a CP200XLS on my hip so it stays home much of the time. It's in the charger about 25% of the time. Within the past 6 months, the charger has begun to occasionally go into charge error mode when the pager is inserted. A quick wipe of the pager contacts with a toothpick is usually enough to restore proper function. Since the pager doesn't get out much, it doesn't have much chance to get gooped up with dirt so my guess is there is some kind of slow oxidation process over time that starts to block electrical conductivity. Some of my squad members however have brought in pagers with the contact holes plugged full of who knows what and then wonder why the pager won't take a charge.

firerescueluke
New User
Posts: 17
Joined: Sat Feb 16, 2008 1:27 pm

Re: Minitor V programming software issue

Postby firerescueluke » Sun Jan 11, 2015 2:48 pm

Thank you for your replies, I will clean out the contacts again. It should be noted that the exact same equipment works on the old computer however. I will follow up and post results. Thanks again!

firerescueluke
New User
Posts: 17
Joined: Sat Feb 16, 2008 1:27 pm

Re: Minitor V programming software issue

Postby firerescueluke » Sun Jan 11, 2015 6:23 pm

Just a quick update, I did clean all the contacts but still no success.

User avatar
tuckerm
Posts: 528
Joined: Thu Jun 10, 2010 12:21 pm

Re: Minitor V programming software issue

Postby tuckerm » Mon Jan 12, 2015 6:03 am

If the old PC works with the same pager/cabling, then you probably have a driver issue with the new PC. Check Device Manager to ensure drivers are installed.
Schrodinger's Radio: It is simultaneously too loud and too quiet, but you will never know which until someone transmits.

firerescueluke
New User
Posts: 17
Joined: Sat Feb 16, 2008 1:27 pm

Re: Minitor V programming software issue

Postby firerescueluke » Thu Jan 22, 2015 4:53 pm

I have compared the driver info between the 2 machines and they are the same. The serial port works to program other model radios including other Motorola radios. Still stumped!

firerescueluke
New User
Posts: 17
Joined: Sat Feb 16, 2008 1:27 pm

Re: Minitor V programming software issue

Postby firerescueluke » Mon Feb 02, 2015 7:49 am

I ended up ordering a new usb to cradle cable and It works fine. Either it was a bad serial cable or serial port


Return to “Motorola Digital and Voice Paging”

Who is online

Users browsing this forum: No registered users and 1 guest