Minitor 5 audio issue

This forum is focused on discussing Digital and Voice paging equipment, protocol's, infrastructure, and Motorola specific hardware used. Please refrain from discussing different ways to monitor the digital paging systems due to the legalities of such.

Moderator: Queue Moderator

Post Reply
radio64
Posts: 56
Joined: Wed Nov 14, 2001 4:00 pm

Minitor 5 audio issue

Post by radio64 »

I have a Min V pager that is giving me issues lately. Operationally, it appears to be in alert mode (QC tones set off the pager, good 'beep' audio...) then no audio unless you press the monitor button... Just suddenly started with this issue. Have not changed the programming, but I verified it is programmed correctly (i.e. the press monitor to listen button is not checked) Does it regardless of the switch setting (alert F1 tone, monitor F1 tone, monitor F1 vibrate, alert F1 vibrate) good audio when pressing the monitor button, even gets good reception of radio traffic but you have to hold the button to hear anything... Any ideas? Thanks, Ben
Post Reply

Return to “Motorola Digital and Voice Paging”