Identify Motorola pager programmers model attribution?

This forum is focused on discussing Digital and Voice paging equipment, protocol's, infrastructure, and Motorola specific hardware used. Please refrain from discussing different ways to monitor the digital paging systems due to the legalities of such.

Moderator: Queue Moderator

Post Reply
aerol1
New User
Posts: 4
Joined: Fri Jan 22, 2016 3:53 am

Identify Motorola pager programmers model attribution?

Post by aerol1 »

Good afternoon,

I have small DIY paging project and I'm looking for any information about two Motorola programming cradles model attribution in order to identify correct pinout and use that with my pair of Advisors.

Here is a first one:

https://i.imgur.com/gePxkqd.jpg

https://i.imgur.com/P3U6tmC.jpg

https://i.imgur.com/Q4rLQDY.jpg

And another one:

https://i.imgur.com/9E6OUxl.jpg

https://i.imgur.com/NfMuV6K.jpg

https://i.imgur.com/1CUHcDu.jpg


Any help will be insanely appreciated! Thank you
aerol1
New User
Posts: 4
Joined: Fri Jan 22, 2016 3:53 am

Re: Identify Motorola pager programmers model attribution?

Post by aerol1 »

OK so I'm going to paste it here as someone else might be googling for the same info:

AALN4049A - Motorola Firestorm 1 tone pager cradle

AALN4069A - still unknown, please help to identify

Does anyone knows if I can use Motorola Firestorm 1 cradle for programming old Advisor (AAA I believe)? I wanted to dismantle cradle and put RX TX and ground pins directly into Advisor - will that works?
Post Reply

Return to “Motorola Digital and Voice Paging”