Hey all,
I have a few Bravo 800's in the 151-159 version, I need to use them just a wee bit underneathe that lower limit, but I need to get into service mode to accomplish this I believe, which requires a password...
I googled around for a while and turned up nothing, does anyone here have any contact info for Davicomms Tech Support?
Thank you
Daviscomms Technical Suppport? Bravo 800 and BR802 pagers
Moderator: Queue Moderator
-
The Pager Geek
- Posts: 1250
- Joined: Fri Jun 21, 2002 10:31 pm
- What radios do you own?: Disney FRS
Re: Daviscomms Technical Suppport? Bravo 800 and BR802 pagers
in true batlabs form, hack the band split, or service password...
tpg
tpg
Experienced Provider of Useless Information
-
VE9MP
- NOT ALLOWED TO BUY/SELL/TRADE
- Posts: 429
- Joined: Wed Jan 05, 2005 11:38 am
- What radios do you own?: FPP Railroad XTL9000 Cleancab
Re: Daviscomms Technical Suppport? Bravo 800 and BR802 pagers
Haha easier said then done, but it may come down to that 
-----Nick-----
"I can trip some repeaters in Maine, but I'm not getting any audio into it, is there some type of tone frequency I use? If so do you know what one is for Maine?" - The SMT Machine
"I can trip some repeaters in Maine, but I'm not getting any audio into it, is there some type of tone frequency I use? If so do you know what one is for Maine?" - The SMT Machine
-
VE9MP
- NOT ALLOWED TO BUY/SELL/TRADE
- Posts: 429
- Joined: Wed Jan 05, 2005 11:38 am
- What radios do you own?: FPP Railroad XTL9000 Cleancab
Re: Daviscomms Technical Suppport? Bravo 800 and BR802 pagers
For future reference, in case anyone else runs into the same situation...
Hex address C540 change 7418 to 9090
Hex address F525 change 74 to EB
This will allow you to enter any frequency you want, also when you press "service mode" and it asks for a password, enter in
anything... just don't leave it blank, and it will accept it...
All the newest up to date software is available to donwload directly off the manufacterers website at http://daviscomms.com.sg/download.htm
Hex address C540 change 7418 to 9090
Hex address F525 change 74 to EB
This will allow you to enter any frequency you want, also when you press "service mode" and it asks for a password, enter in
anything... just don't leave it blank, and it will accept it...
All the newest up to date software is available to donwload directly off the manufacterers website at http://daviscomms.com.sg/download.htm
Re: Daviscomms Technical Suppport? Bravo 800 and BR802 pagers
Edit: At the suggestion of one of our mods, I've started a new thread here